Image 1 of 2
Image 2 of 2
Milwaukee Glass pH Probe
The Milwaukee Glass pH Probe is a lab-grade single junction, gel-filled glass pH probe for controllers, meters, and monitors with a BNC connector. It is used to measure pH in aquarium, service, education, and general testing applications where the meter accepts a standard BNC pH probe.
Available to special order — Ordered from our supplier; not stocked at our Palm Bay location. Contact us to confirm availability and fulfillment timing.
Product details & compatibility
Glass pH Probe for Controllers, Meters, and Monitors
The Milwaukee Glass pH Probe is a lab-grade single junction, gel-filled glass pH probe for controllers, meters, and monitors with a BNC connector. It is used to measure pH in aquarium, service, education, and general testing applications where the meter accepts a standard BNC pH probe.
The glass body and gel-filled design make it a low-maintenance replacement probe because it does not require electrolyte refilling. The 1 meter cable gives room to route the probe from the sample area to the meter or controller while keeping the BNC connection secure.
Key Features:
- Lab-grade glass pH probe for pH measurement.
- Single-junction design for general pH testing applications.
- Gel-filled electrode does not require electrolyte refilling.
- BNC connector works with compatible controllers, meters, and monitors.
- 1 meter cable gives room for routing between the probe and meter.
- Glass body supports general testing and education use.
- Useful as a replacement probe for compatible Milwaukee pH meters.
Ideal For:
- Aquarium hobbyists replacing a worn pH probe on a BNC-compatible meter or controller.
- Service techs who need a glass pH probe for field testing and calibration work.
- Education or lab users who need a simple gel-filled glass pH electrode with a BNC connector.
Pro Tips:
- Calibrate before use. New and replacement pH probes should be calibrated before they are trusted for aquarium or service readings.
- Keep the glass tip wet. A dry pH probe can respond slowly or fail early. Store it in proper electrode storage solution when not in use.
- Rinse between buffers. Rinse the probe with clean water before moving between calibration solutions. This helps avoid cross-contamination.
- Clean before recalibrating a drifting probe. Buildup on the glass tip can make readings slow or unstable. Clean the probe before assuming it needs replacement.
- Match the connector first. This probe uses a BNC connector. Confirm the meter, monitor, or controller accepts BNC pH probes before purchase.
Specifications & included equipment
What's Included:
- 1 Milwaukee Glass pH Probe
Specifications:
- Brand: Milwaukee
- Product Name: Milwaukee Glass pH Probe
- SKU: CV-MA991B-1
- Product Type: pH probe
- Probe Type: Glass pH electrode
- Junction Type: Single junction
- Fill Type: Gel-filled
- Connector Type: BNC
- Cable Length: 1 meter
- Compatibility: Controllers, meters, and monitors with a BNC connector
- Electrolyte Refill Required: No
Ordering & pickup
Online checkout is for local pickup after your special order arrives. Contact High Tide Aquatics before ordering if you need shipping or delivery. Check the required controller, connection ports, power supply, and included components for your setup.
Manufacturer SKU: CV-MA991B-1
The Milwaukee Glass pH Probe is a lab-grade single junction, gel-filled glass pH probe for controllers, meters, and monitors with a BNC connector. It is used to measure pH in aquarium, service, education, and general testing applications where the meter accepts a standard BNC pH probe.
Available to special order — Ordered from our supplier; not stocked at our Palm Bay location. Contact us to confirm availability and fulfillment timing.
Product details & compatibility
Glass pH Probe for Controllers, Meters, and Monitors
The Milwaukee Glass pH Probe is a lab-grade single junction, gel-filled glass pH probe for controllers, meters, and monitors with a BNC connector. It is used to measure pH in aquarium, service, education, and general testing applications where the meter accepts a standard BNC pH probe.
The glass body and gel-filled design make it a low-maintenance replacement probe because it does not require electrolyte refilling. The 1 meter cable gives room to route the probe from the sample area to the meter or controller while keeping the BNC connection secure.
Key Features:
- Lab-grade glass pH probe for pH measurement.
- Single-junction design for general pH testing applications.
- Gel-filled electrode does not require electrolyte refilling.
- BNC connector works with compatible controllers, meters, and monitors.
- 1 meter cable gives room for routing between the probe and meter.
- Glass body supports general testing and education use.
- Useful as a replacement probe for compatible Milwaukee pH meters.
Ideal For:
- Aquarium hobbyists replacing a worn pH probe on a BNC-compatible meter or controller.
- Service techs who need a glass pH probe for field testing and calibration work.
- Education or lab users who need a simple gel-filled glass pH electrode with a BNC connector.
Pro Tips:
- Calibrate before use. New and replacement pH probes should be calibrated before they are trusted for aquarium or service readings.
- Keep the glass tip wet. A dry pH probe can respond slowly or fail early. Store it in proper electrode storage solution when not in use.
- Rinse between buffers. Rinse the probe with clean water before moving between calibration solutions. This helps avoid cross-contamination.
- Clean before recalibrating a drifting probe. Buildup on the glass tip can make readings slow or unstable. Clean the probe before assuming it needs replacement.
- Match the connector first. This probe uses a BNC connector. Confirm the meter, monitor, or controller accepts BNC pH probes before purchase.
Specifications & included equipment
What's Included:
- 1 Milwaukee Glass pH Probe
Specifications:
- Brand: Milwaukee
- Product Name: Milwaukee Glass pH Probe
- SKU: CV-MA991B-1
- Product Type: pH probe
- Probe Type: Glass pH electrode
- Junction Type: Single junction
- Fill Type: Gel-filled
- Connector Type: BNC
- Cable Length: 1 meter
- Compatibility: Controllers, meters, and monitors with a BNC connector
- Electrolyte Refill Required: No
Ordering & pickup
Online checkout is for local pickup after your special order arrives. Contact High Tide Aquatics before ordering if you need shipping or delivery. Check the required controller, connection ports, power supply, and included components for your setup.
Manufacturer SKU: CV-MA991B-1