Image 1 of 2
Image 2 of 2
IceCap Reverse Osmosis Manual Flush Valve 550
The IceCap Manual RO Membrane Flush Valve 550 (SKU: IP-RI-MFV550) is an authentic, premium water-plumbing component distributed by CoralVue to optimize waste-line backpressure and increase membrane lifespan in home purification systems. In standard reverse osmosis (RO/DI) systems, a flow restrictor is absolutely vital on the red waste line.
Available to special order — Ordered from our supplier; not stocked at our Palm Bay location. Contact us to confirm availability and fulfillment timing.
Product details & features
IceCap Manual RO Membrane Flush Valve & 550mL Flow Restrictor (SKU: IP-RI-MFV550)
The IceCap Manual RO Membrane Flush Valve 550 (SKU: IP-RI-MFV550) is an authentic, premium water-plumbing component distributed by CoralVue to optimize waste-line backpressure and increase membrane lifespan in home purification systems. In standard reverse osmosis (RO/DI) systems, a flow restrictor is absolutely vital on the red waste line. Without one, water would freely rush out the drain path, leaving no backpressure to force pure water molecules through the underlying TFC membrane sheet. However, because flow restrictors intentionally bottle up the waste line, concentrated minerals like calcium, magnesium, and silicates slowly settle onto the membrane surface, scaling it up and causing premature drop-offs in water production.
The structural advantage of the IP-RI-MFV550 centers on its Unified dual-purpose architecture. Instead of wrestling with a tangled web of separate splitters, separate tubing lines, and independent shutoff valves to build a manual flush layout, this component combines everything inside a single body. Flipping the handle changes the internal path instantly. When turned inline with the plumbing run, the valve bypasses the 550 mL/min restriction capillary entirely, allowing water to rush aggressively across the membrane face to sweep away calcified scaling down the drain path. When turned perpendicular, it re-engages the 550mL restriction, building the perfect operating pressure required for clean water collection.
Key Features
Restores Peak Rejection Ratios: Routinely washing away scaling layers preserves your membrane's original rejection performance, keeping your final TDS reading low.
Lowers Operating Costs Over Time: Protecting your primary reverse osmosis membrane from scale tracking helps save your expensive deionization (DI) resin beds from premature exhaustion.
Tool-Free Plumbing Updates: Snaps smoothly into any existing standard 1/4" polyethylene RO line configuration without requiring specialized compression collars.
(Note: This retail package includes (1) fully assembled IceCap Manual Flush Valve with an integrated 550mL flow restrictor core. Membrane housings, source lines, and replacement filters are sold under separate categories).
IceCap Manual Flush Valve Application Continuum
| Model Classification | Factory SKU Identifier | Integrated Restrictor Capacity | Target Membrane System Match |
|---|---|---|---|
| IceCap Manual Flush Valve 550 | IP-RI-MFV550 | 550 mL/min Fixed Flow | 50 & 75 GPD Membranes / 150 GPD Water Savers |
| IceCap Manual Flush Valve 800 | IP-RI-MFV800 | 800 mL/min Fixed Flow | 100 & 150 GPD Membranes / 200 GPD Water Savers |
Specifications & included items
What’s Included:
(1) IceCap Manual RO Membrane Flush Valve with Integrated 550 mL/min Capillary Flow Restrictor
Technical Specs:
Official Manufacturing Title: IceCap RO Manual Flush Valve 550
SKU / Factory Part Identifier: IP-RI-MFV550
Integrated Flow Restriction Calibrated Rate: 550 Milliliters Per Minute (550mL/min)
Plumbing Fitting Connection Port Scale: 1/4-Inch Push-Connect Quick-Lock Interface (1/4in)
Primary Valve Control Mechanism: Manual Direct-Drive Quarter-Turn Ball Array
Target Membrane Compatibility Scale: Rated for 50 GPD, 75 GPD, or Dual 150 GPD Water Saver Configurations
Structural Housing Material Base: Heavy-Duty Inert Polypropylene Plastic Formulation
Brand: IceCap
Manufacturer SKU: IP-RI-MFV550
Ordering & pickup
Online checkout is for local pickup after your special order arrives. Contact High Tide Aquatics before ordering if you need delivery or shipping. Confirm the required size, connections, and equipment compatibility before ordering.
The IceCap Manual RO Membrane Flush Valve 550 (SKU: IP-RI-MFV550) is an authentic, premium water-plumbing component distributed by CoralVue to optimize waste-line backpressure and increase membrane lifespan in home purification systems. In standard reverse osmosis (RO/DI) systems, a flow restrictor is absolutely vital on the red waste line.
Available to special order — Ordered from our supplier; not stocked at our Palm Bay location. Contact us to confirm availability and fulfillment timing.
Product details & features
IceCap Manual RO Membrane Flush Valve & 550mL Flow Restrictor (SKU: IP-RI-MFV550)
The IceCap Manual RO Membrane Flush Valve 550 (SKU: IP-RI-MFV550) is an authentic, premium water-plumbing component distributed by CoralVue to optimize waste-line backpressure and increase membrane lifespan in home purification systems. In standard reverse osmosis (RO/DI) systems, a flow restrictor is absolutely vital on the red waste line. Without one, water would freely rush out the drain path, leaving no backpressure to force pure water molecules through the underlying TFC membrane sheet. However, because flow restrictors intentionally bottle up the waste line, concentrated minerals like calcium, magnesium, and silicates slowly settle onto the membrane surface, scaling it up and causing premature drop-offs in water production.
The structural advantage of the IP-RI-MFV550 centers on its Unified dual-purpose architecture. Instead of wrestling with a tangled web of separate splitters, separate tubing lines, and independent shutoff valves to build a manual flush layout, this component combines everything inside a single body. Flipping the handle changes the internal path instantly. When turned inline with the plumbing run, the valve bypasses the 550 mL/min restriction capillary entirely, allowing water to rush aggressively across the membrane face to sweep away calcified scaling down the drain path. When turned perpendicular, it re-engages the 550mL restriction, building the perfect operating pressure required for clean water collection.
Key Features
Restores Peak Rejection Ratios: Routinely washing away scaling layers preserves your membrane's original rejection performance, keeping your final TDS reading low.
Lowers Operating Costs Over Time: Protecting your primary reverse osmosis membrane from scale tracking helps save your expensive deionization (DI) resin beds from premature exhaustion.
Tool-Free Plumbing Updates: Snaps smoothly into any existing standard 1/4" polyethylene RO line configuration without requiring specialized compression collars.
(Note: This retail package includes (1) fully assembled IceCap Manual Flush Valve with an integrated 550mL flow restrictor core. Membrane housings, source lines, and replacement filters are sold under separate categories).
IceCap Manual Flush Valve Application Continuum
| Model Classification | Factory SKU Identifier | Integrated Restrictor Capacity | Target Membrane System Match |
|---|---|---|---|
| IceCap Manual Flush Valve 550 | IP-RI-MFV550 | 550 mL/min Fixed Flow | 50 & 75 GPD Membranes / 150 GPD Water Savers |
| IceCap Manual Flush Valve 800 | IP-RI-MFV800 | 800 mL/min Fixed Flow | 100 & 150 GPD Membranes / 200 GPD Water Savers |
Specifications & included items
What’s Included:
(1) IceCap Manual RO Membrane Flush Valve with Integrated 550 mL/min Capillary Flow Restrictor
Technical Specs:
Official Manufacturing Title: IceCap RO Manual Flush Valve 550
SKU / Factory Part Identifier: IP-RI-MFV550
Integrated Flow Restriction Calibrated Rate: 550 Milliliters Per Minute (550mL/min)
Plumbing Fitting Connection Port Scale: 1/4-Inch Push-Connect Quick-Lock Interface (1/4in)
Primary Valve Control Mechanism: Manual Direct-Drive Quarter-Turn Ball Array
Target Membrane Compatibility Scale: Rated for 50 GPD, 75 GPD, or Dual 150 GPD Water Saver Configurations
Structural Housing Material Base: Heavy-Duty Inert Polypropylene Plastic Formulation
Brand: IceCap
Manufacturer SKU: IP-RI-MFV550
Ordering & pickup
Online checkout is for local pickup after your special order arrives. Contact High Tide Aquatics before ordering if you need delivery or shipping. Confirm the required size, connections, and equipment compatibility before ordering.