IceCap Reverse Osmosis High Pressure Switch

$21.90

Automating pure water production for top-off containers and saltwater mixing stations requires dependable pressure sensing to turn off equipment when reservoirs are full. The IceCap Reverse Osmosis High Pressure Switch (SKU: IP-RI-HS01) is the official OEM replacement inline cutoff sensor engineered specifically for IceCap Smart RO/DI Systems and IceCap Booster Pump assemblies.

Available to special order — Ordered from our supplier; not stocked at our Palm Bay location. Contact us to confirm availability and fulfillment timing.

Product details & features

IceCap Reverse Osmosis Replacement High Pressure Switch

Automating pure water production for top-off containers and saltwater mixing stations requires dependable pressure sensing to turn off equipment when reservoirs are full. The IceCap Reverse Osmosis High Pressure Switch (SKU: IP-RI-HS01) is the official OEM replacement inline cutoff sensor engineered specifically for IceCap Smart RO/DI Systems and IceCap Booster Pump assemblies.

Installed inline on the pure permeate (product) line between the membrane/DI output and your reservoir float valve, the IP-RI-HS01 monitors line backpressure. In normal operation, water flows freely through the switch, keeping its internal electrical contacts closed to deliver continuous power to the booster pump. When a float valve or float switch solenoid closes as the reservoir fills, pure water can no longer escape. Backpressure rapidly accumulates inside the product line. Once this pressure reaches approximately 35 to 40 PSI, the IP-RI-HS01’s internal diaphragm trips, breaking the electrical circuit to shut down the booster pump instantly. This stops the pump from dead-heading against a closed line, protecting pump diaphragms, preventing burst tubing, and terminating wastewater discharge.

Ideal Replacement Scenario

If your booster pump fails to shut off when your reservoir float valve closes (causing high line pressure and vibrating tubing), if the pump will not turn on at all despite adequate feed pressure, or if the push-connect ports on the switch have developed a leak, installing an authentic IP-RI-HS01 restores reliable automatic shut-off control.

  • (Note: Package includes (1) IceCap Reverse Osmosis High Pressure Switch with integrated 1/4-inch push-connect fittings).


Specifications & included items

What’s Included:

  • (1) IceCap Reverse Osmosis Replacement High Pressure Switch (IP-RI-HS01)

Technical Specs:

  • SKU / Factory Part Identifier: IP-RI-HS01

  • Switch Electrical Architecture: Normally Closed (Opens circuit under high backpressure)

  • Cutoff / Activation Pressure: Approximately 35–40 PSI (0.24–0.28 MPa)

  • Plumbing Connections: (2) Integrated 1/4" OD Push-Fit Quick-Connect Ports

  • Electrical Interface: 2-Pin Terminal Connector Plug

  • Body Material: Food-Grade Polyoxymethylene (POM) Engineering Polymer

  • Primary Compatibility: IceCap Smart RO/DI System (100 GPD), IceCap Booster Pump Kit, universal 24V/36V RO booster systems and automated shutoff setups

Brand: IceCap
Manufacturer SKU: IP-RI-HS01

Ordering & pickup

Online checkout is for local pickup after your special order arrives. Contact High Tide Aquatics before ordering if you need delivery or shipping. Confirm the required size, connections, and equipment compatibility before ordering.

Call or text High Tide Aquatics: 239-244-6788.

Automating pure water production for top-off containers and saltwater mixing stations requires dependable pressure sensing to turn off equipment when reservoirs are full. The IceCap Reverse Osmosis High Pressure Switch (SKU: IP-RI-HS01) is the official OEM replacement inline cutoff sensor engineered specifically for IceCap Smart RO/DI Systems and IceCap Booster Pump assemblies.

Available to special order — Ordered from our supplier; not stocked at our Palm Bay location. Contact us to confirm availability and fulfillment timing.

Product details & features

IceCap Reverse Osmosis Replacement High Pressure Switch

Automating pure water production for top-off containers and saltwater mixing stations requires dependable pressure sensing to turn off equipment when reservoirs are full. The IceCap Reverse Osmosis High Pressure Switch (SKU: IP-RI-HS01) is the official OEM replacement inline cutoff sensor engineered specifically for IceCap Smart RO/DI Systems and IceCap Booster Pump assemblies.

Installed inline on the pure permeate (product) line between the membrane/DI output and your reservoir float valve, the IP-RI-HS01 monitors line backpressure. In normal operation, water flows freely through the switch, keeping its internal electrical contacts closed to deliver continuous power to the booster pump. When a float valve or float switch solenoid closes as the reservoir fills, pure water can no longer escape. Backpressure rapidly accumulates inside the product line. Once this pressure reaches approximately 35 to 40 PSI, the IP-RI-HS01’s internal diaphragm trips, breaking the electrical circuit to shut down the booster pump instantly. This stops the pump from dead-heading against a closed line, protecting pump diaphragms, preventing burst tubing, and terminating wastewater discharge.

Ideal Replacement Scenario

If your booster pump fails to shut off when your reservoir float valve closes (causing high line pressure and vibrating tubing), if the pump will not turn on at all despite adequate feed pressure, or if the push-connect ports on the switch have developed a leak, installing an authentic IP-RI-HS01 restores reliable automatic shut-off control.

  • (Note: Package includes (1) IceCap Reverse Osmosis High Pressure Switch with integrated 1/4-inch push-connect fittings).


Specifications & included items

What’s Included:

  • (1) IceCap Reverse Osmosis Replacement High Pressure Switch (IP-RI-HS01)

Technical Specs:

  • SKU / Factory Part Identifier: IP-RI-HS01

  • Switch Electrical Architecture: Normally Closed (Opens circuit under high backpressure)

  • Cutoff / Activation Pressure: Approximately 35–40 PSI (0.24–0.28 MPa)

  • Plumbing Connections: (2) Integrated 1/4" OD Push-Fit Quick-Connect Ports

  • Electrical Interface: 2-Pin Terminal Connector Plug

  • Body Material: Food-Grade Polyoxymethylene (POM) Engineering Polymer

  • Primary Compatibility: IceCap Smart RO/DI System (100 GPD), IceCap Booster Pump Kit, universal 24V/36V RO booster systems and automated shutoff setups

Brand: IceCap
Manufacturer SKU: IP-RI-HS01

Ordering & pickup

Online checkout is for local pickup after your special order arrives. Contact High Tide Aquatics before ordering if you need delivery or shipping. Confirm the required size, connections, and equipment compatibility before ordering.

Call or text High Tide Aquatics: 239-244-6788.