IceCap Dow Filmtec 100GPD Reverse Osmosis Membrane

$54.04

The Dow Filmtec TW30-1812-100HR is a 100-gallon-per-day thin-film composite (TFC) reverse osmosis membrane for hobbyists replacing a worn membrane in an existing RO or RO/DI system. It fits any standard pressure vessel sized for a 1.75in x 11.74in element, including IceCap RO systems and virtually every other brand using the common 2in x 12in housing format.

Available to special order — Ordered from our supplier; not stocked at our Palm Bay location. Contact us to confirm availability and fulfillment timing.

Product details & features

Dow Filmtec 100 GPD Thin Film Composite RO Membrane for Aquarium Use

The Dow Filmtec TW30-1812-100HR is a 100-gallon-per-day thin-film composite (TFC) reverse osmosis membrane for hobbyists replacing a worn membrane in an existing RO or RO/DI system. It fits any standard pressure vessel sized for a 1.75in x 11.74in element, including IceCap RO systems and virtually every other brand using the common 2in x 12in housing format.

The membrane is rated at 96-98% TDS rejection and is tested and listed to NSF/ANSI Standard 58 for drinking water systems. It is rated at 50 PSI operating pressure, which means it produces approximately 20% more purified water per PSI than competing membranes rated at 60 PSI — a meaningful efficiency advantage for hobbyists managing waste water ratios.Chlorine will destroy a TFC membrane. If your feed water is chlorinated municipal water, a carbon block pre-filter must be installed upstream of the membrane before putting this element in service. Actual production output will vary based on water temperature, feed pressure, and TDS levels.

Key Features:

  • 100 GPD production rate at standard test conditions
  • 96-98% TDS rejection rate
  • Fits standard 1.75in x 11.74in pressure vessels used in IceCap and most other RO systems
  • Rated at 50 PSI; produces more purified water per PSI than membranes rated at 60 PSI
  • NSF/ANSI Standard 58 listed for drinking water applications
  • Thin film composite (TFC) construction; requires chlorine-free feed water

Ideal For:

  • Hobbyists replacing a spent or chlorine-damaged membrane in an existing RO or RO/DI system
  • Reef and freshwater aquarium keepers who need consistent low-TDS source water for top-off or water changes
  • Anyone upgrading from a lower GPD membrane and wanting more daily production from the same housing

Pro Tips:

  • Always run a carbon block pre-filter upstream of this membrane. Residual chlorine in municipal water will irreversibly damage the TFC membrane. Do not install this membrane without confirmed chlorine or chloramine removal upstream.
  • Flush the membrane before putting it in service. Run the RO system to drain for at least 30 minutes after installing a new membrane to flush manufacturing residues before directing output to your DI stage or aquarium.
  • Lower water temperature reduces production output. TFC membranes produce significantly less water in cold conditions. If your tap water runs cold in winter, expect reduced daily output and plan water change schedules accordingly.
  • Test TDS before and after the membrane on each water change. A TDS meter across the membrane is the fastest way to detect membrane degradation before it affects your aquarium. A rising post-membrane TDS reading is the signal to replace.

Specifications & included items

What's Included:

1x Dow Filmtec TW30-1812-100HR RO membrane element


Specifications:

  • SKU: IP-RI-FT1812100
  • Production Rate: 100 GPD (at standard test conditions)
  • TDS Rejection Rate: 96-98%
  • Element Size: 1.75in diameter x 11.74in length
  • Housing Compatibility: Standard 2in x 12in pressure vessel
  • Rated Operating Pressure: 50 PSI
  • Membrane Type: Thin Film Composite (TFC)
  • Certification: NSF/ANSI Standard 58 listed
  • Feed Water Requirement: Chlorine-free; requires carbon pre-filtration on chlorinated municipal water

Brand: IceCap
Manufacturer SKU: IP-RI-FT1812100

Ordering & pickup

Online checkout is for local pickup after your special order arrives. Contact High Tide Aquatics before ordering if you need delivery or shipping. Confirm the required size, connections, and equipment compatibility before ordering.

Call or text High Tide Aquatics: 239-244-6788.

The Dow Filmtec TW30-1812-100HR is a 100-gallon-per-day thin-film composite (TFC) reverse osmosis membrane for hobbyists replacing a worn membrane in an existing RO or RO/DI system. It fits any standard pressure vessel sized for a 1.75in x 11.74in element, including IceCap RO systems and virtually every other brand using the common 2in x 12in housing format.

Available to special order — Ordered from our supplier; not stocked at our Palm Bay location. Contact us to confirm availability and fulfillment timing.

Product details & features

Dow Filmtec 100 GPD Thin Film Composite RO Membrane for Aquarium Use

The Dow Filmtec TW30-1812-100HR is a 100-gallon-per-day thin-film composite (TFC) reverse osmosis membrane for hobbyists replacing a worn membrane in an existing RO or RO/DI system. It fits any standard pressure vessel sized for a 1.75in x 11.74in element, including IceCap RO systems and virtually every other brand using the common 2in x 12in housing format.

The membrane is rated at 96-98% TDS rejection and is tested and listed to NSF/ANSI Standard 58 for drinking water systems. It is rated at 50 PSI operating pressure, which means it produces approximately 20% more purified water per PSI than competing membranes rated at 60 PSI — a meaningful efficiency advantage for hobbyists managing waste water ratios.Chlorine will destroy a TFC membrane. If your feed water is chlorinated municipal water, a carbon block pre-filter must be installed upstream of the membrane before putting this element in service. Actual production output will vary based on water temperature, feed pressure, and TDS levels.

Key Features:

  • 100 GPD production rate at standard test conditions
  • 96-98% TDS rejection rate
  • Fits standard 1.75in x 11.74in pressure vessels used in IceCap and most other RO systems
  • Rated at 50 PSI; produces more purified water per PSI than membranes rated at 60 PSI
  • NSF/ANSI Standard 58 listed for drinking water applications
  • Thin film composite (TFC) construction; requires chlorine-free feed water

Ideal For:

  • Hobbyists replacing a spent or chlorine-damaged membrane in an existing RO or RO/DI system
  • Reef and freshwater aquarium keepers who need consistent low-TDS source water for top-off or water changes
  • Anyone upgrading from a lower GPD membrane and wanting more daily production from the same housing

Pro Tips:

  • Always run a carbon block pre-filter upstream of this membrane. Residual chlorine in municipal water will irreversibly damage the TFC membrane. Do not install this membrane without confirmed chlorine or chloramine removal upstream.
  • Flush the membrane before putting it in service. Run the RO system to drain for at least 30 minutes after installing a new membrane to flush manufacturing residues before directing output to your DI stage or aquarium.
  • Lower water temperature reduces production output. TFC membranes produce significantly less water in cold conditions. If your tap water runs cold in winter, expect reduced daily output and plan water change schedules accordingly.
  • Test TDS before and after the membrane on each water change. A TDS meter across the membrane is the fastest way to detect membrane degradation before it affects your aquarium. A rising post-membrane TDS reading is the signal to replace.

Specifications & included items

What's Included:

1x Dow Filmtec TW30-1812-100HR RO membrane element


Specifications:

  • SKU: IP-RI-FT1812100
  • Production Rate: 100 GPD (at standard test conditions)
  • TDS Rejection Rate: 96-98%
  • Element Size: 1.75in diameter x 11.74in length
  • Housing Compatibility: Standard 2in x 12in pressure vessel
  • Rated Operating Pressure: 50 PSI
  • Membrane Type: Thin Film Composite (TFC)
  • Certification: NSF/ANSI Standard 58 listed
  • Feed Water Requirement: Chlorine-free; requires carbon pre-filtration on chlorinated municipal water

Brand: IceCap
Manufacturer SKU: IP-RI-FT1812100

Ordering & pickup

Online checkout is for local pickup after your special order arrives. Contact High Tide Aquatics before ordering if you need delivery or shipping. Confirm the required size, connections, and equipment compatibility before ordering.

Call or text High Tide Aquatics: 239-244-6788.