IceCap 200gpd Reverse Osmosis Membrane Upgrade Kit

$87.65

Producing large volumes of purified zero-TDS water for extensive reef aquariums often results in substantial wastewater and lengthy reservoir fill times. The IceCap Reverse Osmosis Membrane Housing Upgrade Kit to 200gpd (SKU: IP-RI-ROH200) is the official OEM water-saving piggyback expansion kit engineered to double the purification rate of 100 GPD Reverse Osmosis and RO/DI Systems .

Available to special order — Ordered from our supplier; not stocked at our Palm Bay location. Contact us to confirm availability and fulfillment timing.

Product details & features

IceCap 200 GPD Reverse Osmosis Housing Upgrade Kit

Producing large volumes of purified zero-TDS water for extensive reef aquariums often results in substantial wastewater and lengthy reservoir fill times. The IceCap Reverse Osmosis Membrane Housing Upgrade Kit to 200gpd (SKU: IP-RI-ROH200) is the official OEM water-saving piggyback expansion kit engineered to double the purification rate of 100 GPD Reverse Osmosis and RO/DI Systems.

Rather than running a single membrane that discards up to four gallons of wastewater for every gallon of product water, this piggyback system connects a secondary 100 GPD membrane in series with the primary membrane's concentrate (waste) line. Because pre-filtered wastewater has already passed through sediment and carbon stages, the secondary DOW Filmtec membrane extracts an equal volume of pure permeate water from the waste stream before it ever reaches the drain. This configuration doubles output from approximately 4.1 gallons per hour to over 8.3 gallons per hour while cutting overall wastewater volume in half.

Operational Requirement: Operating dual membranes in series requires a minimum feed pressure of 65 PSI (with 65–90 PSI recommended) to properly drive water across both membranes without excessive pressure drop. A booster pump should be utilized if municipal line pressure falls below 65 PSI.

Ideal Application Scenario

If you operate an IceCap 100 GPD system (or standard third-party 100 GPD RO unit) and want to fill mixing reservoirs twice as fast while significantly lowering municipal water waste, installing the authentic IP-RI-ROH200 upgrade kit delivers immediate capacity and efficiency gains.

  • (Note: Package includes (1) DOW Filmtec 100 GPD RO Membrane, (1) RO Membrane Housing, (2) 2.5" x 2.5" Standoff Clips, (2) 1/8" x 1/4" 90° Elbows, (1) 1/8" x 1/4" 90° Check Valve, (1) 1/4" Tube Splitter, and (5) Feet of 1/4" White RO Tubing).

Specifications & included items

What’s Included:

  • (1) DOW Filmtec 100 GPD Thin Film Composite (TFC) RO Membrane

  • (1) Standard 2.5" Reverse Osmosis Membrane Pressure Housing

  • (2) 2.5" x 2.5" Membrane Standoff Double Mounting Clips

  • (2) 1/8" NPT Male x 1/4" Push-Connect 90-Degree Elbow Fittings (Pre-installed)

  • (1) 1/8" NPT Male x 1/4" Push-Connect 90-Degree Check Valve (Pre-installed on product port)

  • (1) 1/4" Quick-Connect Tube Splitter / Union Tee

  • (5) Feet of 1/4" High-Pressure Polyethylene Tubing (White)

Technical Specs:

  • SKU / Factory Part Identifier: IP-RI-ROH200

  • Target System Volume: 200 Gallons Per Day (~8.33 GPH)

  • Membrane Rejection Rate: 96% – 98% Typical Stabilized Salt Rejection

  • Minimum Operational Pressure: 65 PSI

  • Optimal Pressure Range: 65–90 PSI

  • Recommended Water Temperature: 77°F (25°C)

  • Recommended Max Source TDS: <300 ppm

  • Recommended Flow Restrictor: 800 mL/min (matched to 100 GPD rating on the final waste port)

  • Primary Compatibility: IceCap 4-Stage 100 GPD RO/DI, IceCap Smart RO/DI (100 GPD configuration), standard residential 100 GPD RO systems

Brand: IceCap
Manufacturer SKU: IP-RI-ROH200

Ordering & pickup

Online checkout is for local pickup after your special order arrives. Contact High Tide Aquatics before ordering if you need delivery or shipping. Confirm the required size, connections, and equipment compatibility before ordering.

Call or text High Tide Aquatics: 239-244-6788.

Producing large volumes of purified zero-TDS water for extensive reef aquariums often results in substantial wastewater and lengthy reservoir fill times. The IceCap Reverse Osmosis Membrane Housing Upgrade Kit to 200gpd (SKU: IP-RI-ROH200) is the official OEM water-saving piggyback expansion kit engineered to double the purification rate of 100 GPD Reverse Osmosis and RO/DI Systems .

Available to special order — Ordered from our supplier; not stocked at our Palm Bay location. Contact us to confirm availability and fulfillment timing.

Product details & features

IceCap 200 GPD Reverse Osmosis Housing Upgrade Kit

Producing large volumes of purified zero-TDS water for extensive reef aquariums often results in substantial wastewater and lengthy reservoir fill times. The IceCap Reverse Osmosis Membrane Housing Upgrade Kit to 200gpd (SKU: IP-RI-ROH200) is the official OEM water-saving piggyback expansion kit engineered to double the purification rate of 100 GPD Reverse Osmosis and RO/DI Systems.

Rather than running a single membrane that discards up to four gallons of wastewater for every gallon of product water, this piggyback system connects a secondary 100 GPD membrane in series with the primary membrane's concentrate (waste) line. Because pre-filtered wastewater has already passed through sediment and carbon stages, the secondary DOW Filmtec membrane extracts an equal volume of pure permeate water from the waste stream before it ever reaches the drain. This configuration doubles output from approximately 4.1 gallons per hour to over 8.3 gallons per hour while cutting overall wastewater volume in half.

Operational Requirement: Operating dual membranes in series requires a minimum feed pressure of 65 PSI (with 65–90 PSI recommended) to properly drive water across both membranes without excessive pressure drop. A booster pump should be utilized if municipal line pressure falls below 65 PSI.

Ideal Application Scenario

If you operate an IceCap 100 GPD system (or standard third-party 100 GPD RO unit) and want to fill mixing reservoirs twice as fast while significantly lowering municipal water waste, installing the authentic IP-RI-ROH200 upgrade kit delivers immediate capacity and efficiency gains.

  • (Note: Package includes (1) DOW Filmtec 100 GPD RO Membrane, (1) RO Membrane Housing, (2) 2.5" x 2.5" Standoff Clips, (2) 1/8" x 1/4" 90° Elbows, (1) 1/8" x 1/4" 90° Check Valve, (1) 1/4" Tube Splitter, and (5) Feet of 1/4" White RO Tubing).

Specifications & included items

What’s Included:

  • (1) DOW Filmtec 100 GPD Thin Film Composite (TFC) RO Membrane

  • (1) Standard 2.5" Reverse Osmosis Membrane Pressure Housing

  • (2) 2.5" x 2.5" Membrane Standoff Double Mounting Clips

  • (2) 1/8" NPT Male x 1/4" Push-Connect 90-Degree Elbow Fittings (Pre-installed)

  • (1) 1/8" NPT Male x 1/4" Push-Connect 90-Degree Check Valve (Pre-installed on product port)

  • (1) 1/4" Quick-Connect Tube Splitter / Union Tee

  • (5) Feet of 1/4" High-Pressure Polyethylene Tubing (White)

Technical Specs:

  • SKU / Factory Part Identifier: IP-RI-ROH200

  • Target System Volume: 200 Gallons Per Day (~8.33 GPH)

  • Membrane Rejection Rate: 96% – 98% Typical Stabilized Salt Rejection

  • Minimum Operational Pressure: 65 PSI

  • Optimal Pressure Range: 65–90 PSI

  • Recommended Water Temperature: 77°F (25°C)

  • Recommended Max Source TDS: <300 ppm

  • Recommended Flow Restrictor: 800 mL/min (matched to 100 GPD rating on the final waste port)

  • Primary Compatibility: IceCap 4-Stage 100 GPD RO/DI, IceCap Smart RO/DI (100 GPD configuration), standard residential 100 GPD RO systems

Brand: IceCap
Manufacturer SKU: IP-RI-ROH200

Ordering & pickup

Online checkout is for local pickup after your special order arrives. Contact High Tide Aquatics before ordering if you need delivery or shipping. Confirm the required size, connections, and equipment compatibility before ordering.

Call or text High Tide Aquatics: 239-244-6788.