Image 1 of 5
Image 2 of 5
Image 3 of 5
Image 4 of 5
Image 5 of 5
IceCap 200 GPD Reverse Osmosis (RODI) Water Filtration System
Highest-Output 4-Stage RO/DI System in the IceCap Line The IceCap 200 GPD RO/DI System is the highest-output model in the IceCap RO/DI line, producing up to 200 gallons of purified water per day with a 1.5:1 waste-to-product ratio. It is designed for hobbyists with large systems, high water change volumes, or both, where lower-output models create a production bottleneck.
Available to special order — Ordered from our supplier; not stocked at our Palm Bay location. Contact us to confirm availability and fulfillment timing.
Product details & features
Highest-Output 4-Stage RO/DI System in the IceCap Line
The IceCap 200 GPD RO/DI System is the highest-output model in the IceCap RO/DI line, producing up to 200 gallons of purified water per day with a 1.5:1 waste-to-product ratio. It is designed for hobbyists with large systems, high water change volumes, or both, where lower-output models create a production bottleneck. Like the 150 GPD, the improved 1.5:1 waste ratio makes it significantly more water-efficient than the 75 GPD and 100 GPD models, which operate at a 3:1 ratio.
The 200 GPD uses the Dow Filmtec TW30-1812-100HP membrane, the same membrane used in the 100 GPD model, providing 96 to 98% typical salt rejection at 65 PSI. The higher daily output compared to the 150 GPD comes from this higher-capacity membrane rather than from different pressure requirements; both the 150 GPD and 200 GPD require 65 to 80 PSI and share identical 16" x 6.5" x 18" dimensions.
All other features are identical to the rest of the IceCap RO/DI line: auto shut-off valve, manual flush flow restrictor, glycerin-filled pressure gauge, and all installation fittings and tubing included. Standard 10" canisters and 1/4" push-connect fittings make replacement filter sourcing straightforward.
Key Features:
- 200 GPD output is the highest in the IceCap RO/DI line, rated for the fastest fill times and largest water change volumes.
- 1.5:1 waste-to-product ratio produces significantly less wastewater per gallon than the 75 GPD or 100 GPD models.
- Dow Filmtec TW30-1812-100HP membrane provides 96 to 98% typical salt rejection at 65 PSI.
- Refillable DI cartridge with color-changing resin for visual exhaustion monitoring.
- Auto shut-off valve and manual flush flow restrictor included.
- No power source required; runs on 65 to 80 PSI household water pressure.
- Same footprint and dimensions as the 150 GPD at 16" x 6.5" x 18".
- Standard 10" canisters and 1/4" push-connect fittings.
- Glycerin-filled pressure gauge included.
Ideal For:
- Large reef and saltwater systems where daily top-off or frequent large water changes require the highest available purified water output.
- Fish rooms, coral propagation setups, or multi-tank systems where production volume is the primary concern.
- Hobbyists on metered water or in drought-restricted areas who also need maximum output and want the best waste ratio available in the line.
- Installations where supply pressure is reliably 65 to 80 PSI or where a booster pump is already in use.
200GPD System
IC-RI200
200* Gallons Per Day
16 x 6.5 x 18in (LxWxH)
1.5:1 Waste to Water Ratio
98% Rejection Rate*
Auto Shut Off Valve
Man. Flush Flow Restrictor
Installation Adapters
65-80psi Water Pressure*
1/4in RO Tubing Required
This Product
150GPD System
IC-RI150
150* Gallons Per Day
16 x 6.5 x 18in (LxWxH)
1.5:1 Waste to Water Ratio
99% Rejection Rate*
Auto Shut Off Valve
Man. Flush Flow Restrictor
Installation Adapters
60-80psi Water Pressure*
1/4in RO Tubing Required
Learn More
100GPD System
IC-RI100
100* Gallons Per Day
16 x 6.5 x 15.5in (LxWxH)
3:1 Waste to Water Ratio
98% Rejection Rate*
Auto Shut Off Valve
Man. Flush Flow Restrictor
Installation Adapters
50-80psi Water Pressure*
1/4in RO Tubing Required
Learn More
75GPD System
IC-RI75
75* Gallons Per Day
16 x 6.5 x 15.5in (LxWxH)
3:1 Waste to Water Ratio
99% Rejection Rate*
Auto Shut Off Valve
Man. Flush Flow Restrictor
Installation Adapters
50-80psi Water Pressure*
1/4in RO Tubing Required
Learn More
Specifications & included items
What's Included:
- 200 GPD RO/DI system with mounting hardware
- Stage 1: IceCap 5-micron polypropylene sediment filter
- Stage 2: IceCap 5-micron CTO carbon block filter
- Stage 3: Dow Filmtec TW30-1812-100HP RO membrane
- Stage 4: Refillable mixed-bed DI resin cartridge (color-changing)
- Glycerin-filled pressure gauge
- Auto shut-off valve
- Manual flush flow restrictor
- Installation fittings and 1/4" polyethylene tubing
- Universal filter wrench
Specifications:
- Output: 200 GPD*
- Waste-to-Product Ratio: 1.5:1
- Rejection Rate: 98% typical*
- RO Membrane: Dow Filmtec TW30-1812-100HP
- Optimal Feed Pressure: 65 to 80 PSI
- Maximum Water Pressure: 150 PSI
- Optimal Water Temperature: 25°C (77°F)
- Maximum Water Temperature: 39°C (90°F)
- pH Range: 2 to 11
- Canister Size: Standard 10"
- Plumbing: 1/4" push-connect fittings
- Dimensions (L x W x H): 16" x 6.5" x 18"
- Power Required: None
*Rated at 77°F and 65 PSI. Actual output and rejection rate vary with feed water temperature, pressure, and TDS.
Brand: IceCap
Manufacturer SKU: IC-RI200
Ordering & pickup
Online checkout is for local pickup after your special order arrives. Contact High Tide Aquatics before ordering if you need delivery or shipping. Confirm the required size, connections, and equipment compatibility before ordering.
Call or text High Tide Aquatics: 239-244-6788.
Highest-Output 4-Stage RO/DI System in the IceCap Line The IceCap 200 GPD RO/DI System is the highest-output model in the IceCap RO/DI line, producing up to 200 gallons of purified water per day with a 1.5:1 waste-to-product ratio. It is designed for hobbyists with large systems, high water change volumes, or both, where lower-output models create a production bottleneck.
Available to special order — Ordered from our supplier; not stocked at our Palm Bay location. Contact us to confirm availability and fulfillment timing.
Product details & features
Highest-Output 4-Stage RO/DI System in the IceCap Line
The IceCap 200 GPD RO/DI System is the highest-output model in the IceCap RO/DI line, producing up to 200 gallons of purified water per day with a 1.5:1 waste-to-product ratio. It is designed for hobbyists with large systems, high water change volumes, or both, where lower-output models create a production bottleneck. Like the 150 GPD, the improved 1.5:1 waste ratio makes it significantly more water-efficient than the 75 GPD and 100 GPD models, which operate at a 3:1 ratio.
The 200 GPD uses the Dow Filmtec TW30-1812-100HP membrane, the same membrane used in the 100 GPD model, providing 96 to 98% typical salt rejection at 65 PSI. The higher daily output compared to the 150 GPD comes from this higher-capacity membrane rather than from different pressure requirements; both the 150 GPD and 200 GPD require 65 to 80 PSI and share identical 16" x 6.5" x 18" dimensions.
All other features are identical to the rest of the IceCap RO/DI line: auto shut-off valve, manual flush flow restrictor, glycerin-filled pressure gauge, and all installation fittings and tubing included. Standard 10" canisters and 1/4" push-connect fittings make replacement filter sourcing straightforward.
Key Features:
- 200 GPD output is the highest in the IceCap RO/DI line, rated for the fastest fill times and largest water change volumes.
- 1.5:1 waste-to-product ratio produces significantly less wastewater per gallon than the 75 GPD or 100 GPD models.
- Dow Filmtec TW30-1812-100HP membrane provides 96 to 98% typical salt rejection at 65 PSI.
- Refillable DI cartridge with color-changing resin for visual exhaustion monitoring.
- Auto shut-off valve and manual flush flow restrictor included.
- No power source required; runs on 65 to 80 PSI household water pressure.
- Same footprint and dimensions as the 150 GPD at 16" x 6.5" x 18".
- Standard 10" canisters and 1/4" push-connect fittings.
- Glycerin-filled pressure gauge included.
Ideal For:
- Large reef and saltwater systems where daily top-off or frequent large water changes require the highest available purified water output.
- Fish rooms, coral propagation setups, or multi-tank systems where production volume is the primary concern.
- Hobbyists on metered water or in drought-restricted areas who also need maximum output and want the best waste ratio available in the line.
- Installations where supply pressure is reliably 65 to 80 PSI or where a booster pump is already in use.
200GPD System
IC-RI200
200* Gallons Per Day
16 x 6.5 x 18in (LxWxH)
1.5:1 Waste to Water Ratio
98% Rejection Rate*
Auto Shut Off Valve
Man. Flush Flow Restrictor
Installation Adapters
65-80psi Water Pressure*
1/4in RO Tubing Required
This Product
150GPD System
IC-RI150
150* Gallons Per Day
16 x 6.5 x 18in (LxWxH)
1.5:1 Waste to Water Ratio
99% Rejection Rate*
Auto Shut Off Valve
Man. Flush Flow Restrictor
Installation Adapters
60-80psi Water Pressure*
1/4in RO Tubing Required
Learn More
100GPD System
IC-RI100
100* Gallons Per Day
16 x 6.5 x 15.5in (LxWxH)
3:1 Waste to Water Ratio
98% Rejection Rate*
Auto Shut Off Valve
Man. Flush Flow Restrictor
Installation Adapters
50-80psi Water Pressure*
1/4in RO Tubing Required
Learn More
75GPD System
IC-RI75
75* Gallons Per Day
16 x 6.5 x 15.5in (LxWxH)
3:1 Waste to Water Ratio
99% Rejection Rate*
Auto Shut Off Valve
Man. Flush Flow Restrictor
Installation Adapters
50-80psi Water Pressure*
1/4in RO Tubing Required
Learn More
Specifications & included items
What's Included:
- 200 GPD RO/DI system with mounting hardware
- Stage 1: IceCap 5-micron polypropylene sediment filter
- Stage 2: IceCap 5-micron CTO carbon block filter
- Stage 3: Dow Filmtec TW30-1812-100HP RO membrane
- Stage 4: Refillable mixed-bed DI resin cartridge (color-changing)
- Glycerin-filled pressure gauge
- Auto shut-off valve
- Manual flush flow restrictor
- Installation fittings and 1/4" polyethylene tubing
- Universal filter wrench
Specifications:
- Output: 200 GPD*
- Waste-to-Product Ratio: 1.5:1
- Rejection Rate: 98% typical*
- RO Membrane: Dow Filmtec TW30-1812-100HP
- Optimal Feed Pressure: 65 to 80 PSI
- Maximum Water Pressure: 150 PSI
- Optimal Water Temperature: 25°C (77°F)
- Maximum Water Temperature: 39°C (90°F)
- pH Range: 2 to 11
- Canister Size: Standard 10"
- Plumbing: 1/4" push-connect fittings
- Dimensions (L x W x H): 16" x 6.5" x 18"
- Power Required: None
*Rated at 77°F and 65 PSI. Actual output and rejection rate vary with feed water temperature, pressure, and TDS.
Brand: IceCap
Manufacturer SKU: IC-RI200
Ordering & pickup
Online checkout is for local pickup after your special order arrives. Contact High Tide Aquatics before ordering if you need delivery or shipping. Confirm the required size, connections, and equipment compatibility before ordering.
Call or text High Tide Aquatics: 239-244-6788.