Image 1 of 3
Image 2 of 3
Image 3 of 3
IceCap 150gpd Reverse Osmosis Membrane Upgrade Kit
Producing high volumes of purified zero-TDS water for large reef aquariums often results in substantial wastewater and lengthy reservoir fill times. The IceCap RO Housing Upgrade Kit to 150gpd (SKU: IP-RI-ROH150) is the official OEM water-saving piggyback expansion kit engineered to double the purification rate of 75 GPD Reverse Osmosis and RO/DI Systems .
Available to special order — Ordered from our supplier; not stocked at our Palm Bay location. Contact us to confirm availability and fulfillment timing.
Product details & features
IceCap 150 GPD Reverse Osmosis Housing Upgrade Kit
Producing high volumes of purified zero-TDS water for large reef aquariums often results in substantial wastewater and lengthy reservoir fill times. The IceCap RO Housing Upgrade Kit to 150gpd (SKU: IP-RI-ROH150) is the official OEM water-saving piggyback expansion kit engineered to double the purification rate of 75 GPD Reverse Osmosis and RO/DI Systems.
Rather than running a single membrane that discards up to four gallons of wastewater for every gallon of product water, this piggyback system connects a secondary 75 GPD membrane in series with the primary membrane's concentrate (waste) line. Because pre-filtered wastewater has already passed through sediment and carbon stages, the secondary DOW Filmtec membrane extracts an equal volume of pure permeate water from the waste stream before it ever reaches the drain. This configuration doubles output from approximately 3 gallons per hour to 6 gallons per hour while cutting overall wastewater volume in half.
Operational Requirement: Operating dual membranes in series requires a minimum feed pressure of 65 PSI (with 65–90 PSI recommended) to properly drive water across both membranes without excessive pressure drop. A booster pump should be utilized if municipal line pressure falls below 65 PSI.
Ideal Application Scenario
If you operate an IceCap 75 GPD system (or standard third-party 75 GPD RO unit) and want to fill mixing reservoirs twice as fast while significantly lowering municipal water waste, installing the authentic IP-RI-ROH150 upgrade kit delivers immediate capacity and efficiency gains.
(Note: Package includes (1) DOW Filmtec 75 GPD RO Membrane, (1) RO Membrane Housing, (2) 2.5" x 2.5" Standoff Clips, (2) 1/8" x 1/4" 90° Elbows, (1) 1/8" x 1/4" 90° Check Valve, (1) 1/4" Tube Splitter, and (5) Feet of 1/4" White RO Tubing).
Specifications & included items
What’s Included:
(1) DOW Filmtec 75 GPD Thin Film Composite (TFC) RO Membrane
(1) Standard 2.5" Reverse Osmosis Membrane Pressure Housing
(2) 2.5" x 2.5" Membrane Standoff Double Mounting Clips
(2) 1/8" NPT Male x 1/4" Push-Connect 90-Degree Elbow Fittings (Pre-installed)
(1) 1/8" NPT Male x 1/4" Push-Connect 90-Degree Check Valve (Pre-installed on product port)
(1) 1/4" Quick-Connect Tube Splitter / Union Tee
(5) Feet of 1/4" High-Pressure Polyethylene Tubing (White)
Technical Specs:
SKU / Factory Part Identifier: IP-RI-ROH150
Target System Volume: 150 Gallons Per Day (~6.25 GPH)
Membrane Rejection Rate: 96% – 99% Typical Stabilized Salt Rejection
Minimum Operational Pressure: 65 PSI
Optimal Pressure Range: 65–90 PSI
Recommended Water Temperature: 77°F (25°C)
Recommended Max Source TDS: <300 ppm
Required Flow Restrictor: 550 mL/min (matched to 75 GPD rating on the final waste port)
Primary Compatibility: IceCap 4-Stage 75 GPD RO/DI, IceCap Smart RO/DI (with 75 GPD configuration), standard residential 75 GPD RO systems
Brand: IceCap
Manufacturer SKU: IP-RI-ROH150
Ordering & pickup
Online checkout is for local pickup after your special order arrives. Contact High Tide Aquatics before ordering if you need delivery or shipping. Confirm the required size, connections, and equipment compatibility before ordering.
Producing high volumes of purified zero-TDS water for large reef aquariums often results in substantial wastewater and lengthy reservoir fill times. The IceCap RO Housing Upgrade Kit to 150gpd (SKU: IP-RI-ROH150) is the official OEM water-saving piggyback expansion kit engineered to double the purification rate of 75 GPD Reverse Osmosis and RO/DI Systems .
Available to special order — Ordered from our supplier; not stocked at our Palm Bay location. Contact us to confirm availability and fulfillment timing.
Product details & features
IceCap 150 GPD Reverse Osmosis Housing Upgrade Kit
Producing high volumes of purified zero-TDS water for large reef aquariums often results in substantial wastewater and lengthy reservoir fill times. The IceCap RO Housing Upgrade Kit to 150gpd (SKU: IP-RI-ROH150) is the official OEM water-saving piggyback expansion kit engineered to double the purification rate of 75 GPD Reverse Osmosis and RO/DI Systems.
Rather than running a single membrane that discards up to four gallons of wastewater for every gallon of product water, this piggyback system connects a secondary 75 GPD membrane in series with the primary membrane's concentrate (waste) line. Because pre-filtered wastewater has already passed through sediment and carbon stages, the secondary DOW Filmtec membrane extracts an equal volume of pure permeate water from the waste stream before it ever reaches the drain. This configuration doubles output from approximately 3 gallons per hour to 6 gallons per hour while cutting overall wastewater volume in half.
Operational Requirement: Operating dual membranes in series requires a minimum feed pressure of 65 PSI (with 65–90 PSI recommended) to properly drive water across both membranes without excessive pressure drop. A booster pump should be utilized if municipal line pressure falls below 65 PSI.
Ideal Application Scenario
If you operate an IceCap 75 GPD system (or standard third-party 75 GPD RO unit) and want to fill mixing reservoirs twice as fast while significantly lowering municipal water waste, installing the authentic IP-RI-ROH150 upgrade kit delivers immediate capacity and efficiency gains.
(Note: Package includes (1) DOW Filmtec 75 GPD RO Membrane, (1) RO Membrane Housing, (2) 2.5" x 2.5" Standoff Clips, (2) 1/8" x 1/4" 90° Elbows, (1) 1/8" x 1/4" 90° Check Valve, (1) 1/4" Tube Splitter, and (5) Feet of 1/4" White RO Tubing).
Specifications & included items
What’s Included:
(1) DOW Filmtec 75 GPD Thin Film Composite (TFC) RO Membrane
(1) Standard 2.5" Reverse Osmosis Membrane Pressure Housing
(2) 2.5" x 2.5" Membrane Standoff Double Mounting Clips
(2) 1/8" NPT Male x 1/4" Push-Connect 90-Degree Elbow Fittings (Pre-installed)
(1) 1/8" NPT Male x 1/4" Push-Connect 90-Degree Check Valve (Pre-installed on product port)
(1) 1/4" Quick-Connect Tube Splitter / Union Tee
(5) Feet of 1/4" High-Pressure Polyethylene Tubing (White)
Technical Specs:
SKU / Factory Part Identifier: IP-RI-ROH150
Target System Volume: 150 Gallons Per Day (~6.25 GPH)
Membrane Rejection Rate: 96% – 99% Typical Stabilized Salt Rejection
Minimum Operational Pressure: 65 PSI
Optimal Pressure Range: 65–90 PSI
Recommended Water Temperature: 77°F (25°C)
Recommended Max Source TDS: <300 ppm
Required Flow Restrictor: 550 mL/min (matched to 75 GPD rating on the final waste port)
Primary Compatibility: IceCap 4-Stage 75 GPD RO/DI, IceCap Smart RO/DI (with 75 GPD configuration), standard residential 75 GPD RO systems
Brand: IceCap
Manufacturer SKU: IP-RI-ROH150
Ordering & pickup
Online checkout is for local pickup after your special order arrives. Contact High Tide Aquatics before ordering if you need delivery or shipping. Confirm the required size, connections, and equipment compatibility before ordering.