IceCap 150 GPD Reverse Osmosis (RODI) Water Filtration System

$242.54

High-Output 4-Stage RO/DI System with Improved Waste Ratio The IceCap 150 GPD RO/DI System is a four-stage water filtration unit designed for hobbyists who need higher daily output and want to reduce wastewater at the same time. At 150 gallons per day with a 1.5:1 waste-to-product ratio, it sends approximately 1.5 gallons to drain for each gallon of purified water produced under rated conditions.

Available to special order — Ordered from our supplier; not stocked at our Palm Bay location. Contact us to confirm availability and fulfillment timing.

Product details & features

High-Output 4-Stage RO/DI System with Improved Waste Ratio

The IceCap 150 GPD RO/DI System is a four-stage water filtration unit designed for hobbyists who need higher daily output and want to reduce wastewater at the same time. At 150 gallons per day with a 1.5:1 waste-to-product ratio, it sends approximately 1.5 gallons to drain for each gallon of purified water produced under rated conditions. For hobbyists on metered water, in water-restricted areas, or who simply run through a lot of purified water, this ratio improvement has a meaningful real-world impact on water use and cost.


The 150 GPD uses the same Dow Filmtec BW60-1812-75 membrane as the 75 GPD, which provides 96 to 99% typical salt rejection. The improved waste ratio comes from the higher operating pressure requirement: 65 to 80 PSI optimal, compared to 50 to 80 PSI for the lower-output models. Hobbyists whose home supply pressure falls below 65 PSI will need a booster pump to achieve the rated output and waste ratio on this model.


The system is slightly taller than the 75 GPD and 100 GPD at 16" x 6.5" x 18", but the footprint width and depth are the same, so it fits in most of the same under-sink and utility room installations. All other features are identical to the lower-output models: auto shut-off valve, manual flush flow restrictor, glycerin-filled pressure gauge, and all installation fittings and tubing.


Key Features:

  • 1.5:1 waste-to-product ratio produces significantly less wastewater per gallon than the 75 GPD or 100 GPD models.
  • 150 GPD output for faster fill times on larger systems or more frequent water changes.
  • Dow Filmtec BW60-1812-75 membrane provides 96 to 99% typical salt rejection.
  • Refillable DI cartridge with color-changing resin for visual exhaustion monitoring.
  • Auto shut-off valve and manual flush flow restrictor included.
  • No power source required; runs on 65 to 80 PSI household water pressure.
  • Standard 10" canisters and 1/4" push-connect fittings.
  • Glycerin-filled pressure gauge included.
  • Same footprint width and depth as 75 GPD and 100 GPD; 3" taller at 18" height.

Ideal For:

  • Hobbyists on metered water or in drought-restricted areas where reducing wastewater is a priority.
  • Larger reef and saltwater systems where 75 to 100 GPD output creates a bottleneck during water changes.
  • Installations where the supply pressure is reliably 65 to 80 PSI without a booster pump.
  • Hobbyists stepping up from a 75 GPD or 100 GPD who want both more output and less waste.

Pro Tips:

  • Confirm your supply pressure reaches 65 PSI before purchasing. Unlike the 75 GPD and 100 GPD models, the 150 GPD requires a minimum of 65 PSI to achieve its rated output and 1.5:1 waste ratio. At lower pressures, both output and waste ratio will degrade toward the performance of the lower-output models. A booster pump resolves this if the supply pressure is marginal.
  • The 1.5:1 waste ratio means for every 2 gallons of RO/DI water produced, approximately 3 gallons go to drain. At 150 GPD production, this adds up quickly. Routing the drain line to a garden, lawn, or utility use is a practical way to put the reject water to work rather than losing it entirely.
  • Flush the membrane before first use. Run water to drain for 30 to 60 minutes before collecting product water to clear the membrane preservative.

150GPD System

IC-RI150

150* Gallons Per Day

16 x 6.5 x 18in (LxWxH)

1.5:1 Waste to Water Ratio

99% Rejection Rate*

Auto Shut Off Valve

Man. Flush Flow Restrictor

Installation Adapters

60-80psi Water Pressure*

1/4in RO Tubing Required

This Product

75GPD System

IC-RI75

75* Gallons Per Day

16 x 6.5 x 15.5in (LxWxH)

3:1 Waste to Water Ratio

99% Rejection Rate*

Auto Shut Off Valve

Man. Flush Flow Restrictor

Installation Adapters

50-80psi Water Pressure*

1/4in RO Tubing Required

Learn More

100GPD System

IC-RI100

100* Gallons Per Day

16 x 6.5 x 15.5in (LxWxH)

3:1 Waste to Water Ratio

98% Rejection Rate*

Auto Shut Off Valve

Man. Flush Flow Restrictor

Installation Adapters

50-80psi Water Pressure*

1/4in RO Tubing Required

Learn More

200GPD System

IC-RI200 

200* Gallons Per Day

16 x 6.5 x 18in (LxWxH)

1.5:1 Waste to Water Ratio

98% Rejection Rate*

Auto Shut Off Valve

Man. Flush Flow Restrictor

Installation Adapters

65-80psi Water Pressure*

1/4in RO Tubing Required

Learn More

Specifications & included items

What's Included:

  • 150 GPD RO/DI system with mounting hardware
  • Stage 1: IceCap 5-micron polypropylene sediment filter
  • Stage 2: IceCap 5-micron CTO carbon block filter
  • Stage 3: Dow Filmtec BW60-1812-75 RO membrane
  • Stage 4: Refillable mixed-bed DI resin cartridge (color-changing)
  • Glycerin-filled pressure gauge
  • Auto shut-off valve
  • Manual flush flow restrictor
  • Installation fittings and 1/4" polyethylene tubing
  • Universal filter wrench

Specifications:

  • Output: 150 GPD*
  • Waste-to-Product Ratio: 1.5:1
  • Rejection Rate: 99% typical*
  • RO Membrane: Dow Filmtec BW60-1812-75
  • Optimal Feed Pressure: 65 to 80 PSI
  • Maximum Water Pressure: 150 PSI
  • Optimal Water Temperature: 25°C (77°F)
  • Maximum Water Temperature: 39°C (90°F)
  • pH Range: 2 to 11
  • Canister Size: Standard 10"
  • Plumbing: 1/4" push-connect fittings
  • Dimensions (L x W x H): 16" x 6.5" x 18"
  • Power Required: None

*Rated at 77°F and 65 PSI. Actual output and rejection rate vary with feed water temperature, pressure, and TDS.

Brand: IceCap
Manufacturer SKU: IC-RI150

Ordering & pickup

Online checkout is for local pickup after your special order arrives. Contact High Tide Aquatics before ordering if you need delivery or shipping. Confirm the required size, connections, and equipment compatibility before ordering.

Call or text High Tide Aquatics: 239-244-6788.

High-Output 4-Stage RO/DI System with Improved Waste Ratio The IceCap 150 GPD RO/DI System is a four-stage water filtration unit designed for hobbyists who need higher daily output and want to reduce wastewater at the same time. At 150 gallons per day with a 1.5:1 waste-to-product ratio, it sends approximately 1.5 gallons to drain for each gallon of purified water produced under rated conditions.

Available to special order — Ordered from our supplier; not stocked at our Palm Bay location. Contact us to confirm availability and fulfillment timing.

Product details & features

High-Output 4-Stage RO/DI System with Improved Waste Ratio

The IceCap 150 GPD RO/DI System is a four-stage water filtration unit designed for hobbyists who need higher daily output and want to reduce wastewater at the same time. At 150 gallons per day with a 1.5:1 waste-to-product ratio, it sends approximately 1.5 gallons to drain for each gallon of purified water produced under rated conditions. For hobbyists on metered water, in water-restricted areas, or who simply run through a lot of purified water, this ratio improvement has a meaningful real-world impact on water use and cost.


The 150 GPD uses the same Dow Filmtec BW60-1812-75 membrane as the 75 GPD, which provides 96 to 99% typical salt rejection. The improved waste ratio comes from the higher operating pressure requirement: 65 to 80 PSI optimal, compared to 50 to 80 PSI for the lower-output models. Hobbyists whose home supply pressure falls below 65 PSI will need a booster pump to achieve the rated output and waste ratio on this model.


The system is slightly taller than the 75 GPD and 100 GPD at 16" x 6.5" x 18", but the footprint width and depth are the same, so it fits in most of the same under-sink and utility room installations. All other features are identical to the lower-output models: auto shut-off valve, manual flush flow restrictor, glycerin-filled pressure gauge, and all installation fittings and tubing.


Key Features:

  • 1.5:1 waste-to-product ratio produces significantly less wastewater per gallon than the 75 GPD or 100 GPD models.
  • 150 GPD output for faster fill times on larger systems or more frequent water changes.
  • Dow Filmtec BW60-1812-75 membrane provides 96 to 99% typical salt rejection.
  • Refillable DI cartridge with color-changing resin for visual exhaustion monitoring.
  • Auto shut-off valve and manual flush flow restrictor included.
  • No power source required; runs on 65 to 80 PSI household water pressure.
  • Standard 10" canisters and 1/4" push-connect fittings.
  • Glycerin-filled pressure gauge included.
  • Same footprint width and depth as 75 GPD and 100 GPD; 3" taller at 18" height.

Ideal For:

  • Hobbyists on metered water or in drought-restricted areas where reducing wastewater is a priority.
  • Larger reef and saltwater systems where 75 to 100 GPD output creates a bottleneck during water changes.
  • Installations where the supply pressure is reliably 65 to 80 PSI without a booster pump.
  • Hobbyists stepping up from a 75 GPD or 100 GPD who want both more output and less waste.

Pro Tips:

  • Confirm your supply pressure reaches 65 PSI before purchasing. Unlike the 75 GPD and 100 GPD models, the 150 GPD requires a minimum of 65 PSI to achieve its rated output and 1.5:1 waste ratio. At lower pressures, both output and waste ratio will degrade toward the performance of the lower-output models. A booster pump resolves this if the supply pressure is marginal.
  • The 1.5:1 waste ratio means for every 2 gallons of RO/DI water produced, approximately 3 gallons go to drain. At 150 GPD production, this adds up quickly. Routing the drain line to a garden, lawn, or utility use is a practical way to put the reject water to work rather than losing it entirely.
  • Flush the membrane before first use. Run water to drain for 30 to 60 minutes before collecting product water to clear the membrane preservative.

150GPD System

IC-RI150

150* Gallons Per Day

16 x 6.5 x 18in (LxWxH)

1.5:1 Waste to Water Ratio

99% Rejection Rate*

Auto Shut Off Valve

Man. Flush Flow Restrictor

Installation Adapters

60-80psi Water Pressure*

1/4in RO Tubing Required

This Product

75GPD System

IC-RI75

75* Gallons Per Day

16 x 6.5 x 15.5in (LxWxH)

3:1 Waste to Water Ratio

99% Rejection Rate*

Auto Shut Off Valve

Man. Flush Flow Restrictor

Installation Adapters

50-80psi Water Pressure*

1/4in RO Tubing Required

Learn More

100GPD System

IC-RI100

100* Gallons Per Day

16 x 6.5 x 15.5in (LxWxH)

3:1 Waste to Water Ratio

98% Rejection Rate*

Auto Shut Off Valve

Man. Flush Flow Restrictor

Installation Adapters

50-80psi Water Pressure*

1/4in RO Tubing Required

Learn More

200GPD System

IC-RI200 

200* Gallons Per Day

16 x 6.5 x 18in (LxWxH)

1.5:1 Waste to Water Ratio

98% Rejection Rate*

Auto Shut Off Valve

Man. Flush Flow Restrictor

Installation Adapters

65-80psi Water Pressure*

1/4in RO Tubing Required

Learn More

Specifications & included items

What's Included:

  • 150 GPD RO/DI system with mounting hardware
  • Stage 1: IceCap 5-micron polypropylene sediment filter
  • Stage 2: IceCap 5-micron CTO carbon block filter
  • Stage 3: Dow Filmtec BW60-1812-75 RO membrane
  • Stage 4: Refillable mixed-bed DI resin cartridge (color-changing)
  • Glycerin-filled pressure gauge
  • Auto shut-off valve
  • Manual flush flow restrictor
  • Installation fittings and 1/4" polyethylene tubing
  • Universal filter wrench

Specifications:

  • Output: 150 GPD*
  • Waste-to-Product Ratio: 1.5:1
  • Rejection Rate: 99% typical*
  • RO Membrane: Dow Filmtec BW60-1812-75
  • Optimal Feed Pressure: 65 to 80 PSI
  • Maximum Water Pressure: 150 PSI
  • Optimal Water Temperature: 25°C (77°F)
  • Maximum Water Temperature: 39°C (90°F)
  • pH Range: 2 to 11
  • Canister Size: Standard 10"
  • Plumbing: 1/4" push-connect fittings
  • Dimensions (L x W x H): 16" x 6.5" x 18"
  • Power Required: None

*Rated at 77°F and 65 PSI. Actual output and rejection rate vary with feed water temperature, pressure, and TDS.

Brand: IceCap
Manufacturer SKU: IC-RI150

Ordering & pickup

Online checkout is for local pickup after your special order arrives. Contact High Tide Aquatics before ordering if you need delivery or shipping. Confirm the required size, connections, and equipment compatibility before ordering.

Call or text High Tide Aquatics: 239-244-6788.