HYDROS Tunze 0-10v Pump Adapter

$17.89

The HYDROS WaveEngine 0-10V Tunze Adapter is required to control Tunze pumps with the WaveEngine v2 or Control X4.

Available to special order — Ordered from our supplier; not stocked at our Palm Bay location. Contact us to confirm availability and fulfillment timing.

Product details & compatibility

The HYDROS WaveEngine 0-10V Tunze Adapter is required to control Tunze pumps with the WaveEngine v2 or Control X4. 

You will also need a HYDROS WaveEngine 0-10V Quad Cable for this application.

The way it works is as follows:

  • Connect the Quad Cable to the WaveEngine
  • Connect the Tunze Adapter to the Quad Cable
  • Connect the Tunze Adapter to your Tunze pump controller

You can control up to four 0-10V Tunze pumps with the WaveEngine. To do this, you would need the following:

  • 1 x HYDROS WaveEngine 0-10V Quad Cable
  • 4 x HYDROS WaveEngine 0-10V Tunze Adapter*

*You don't have to use four pumps. If you only had two pumps, you would only need 1 x Quad Cable and 2 x Tunze Adapters. We used four as our example since you can connect a maximum of four pumps with a Quad Cable.

The reason an additional adapter is needed to control Tunze pumps with a WaveEngine is because Tunze pump controllers have a 9-pin jack rather than the more common 3.5 mm stereo jack.

Combine your Tunze pumps with pumps from other brands using the HYDROS WaveEngine for a complete water circulation solution!

Ordering & pickup

Online checkout is for local pickup after your special order arrives. Contact High Tide Aquatics before ordering if you need shipping or delivery. Check the required controller, connection ports, power supply, and included components for your setup.

Manufacturer SKU: HDRS-WE-TNZPA

Call or text High Tide Aquatics: 239-244-6788.

The HYDROS WaveEngine 0-10V Tunze Adapter is required to control Tunze pumps with the WaveEngine v2 or Control X4.

Available to special order — Ordered from our supplier; not stocked at our Palm Bay location. Contact us to confirm availability and fulfillment timing.

Product details & compatibility

The HYDROS WaveEngine 0-10V Tunze Adapter is required to control Tunze pumps with the WaveEngine v2 or Control X4. 

You will also need a HYDROS WaveEngine 0-10V Quad Cable for this application.

The way it works is as follows:

  • Connect the Quad Cable to the WaveEngine
  • Connect the Tunze Adapter to the Quad Cable
  • Connect the Tunze Adapter to your Tunze pump controller

You can control up to four 0-10V Tunze pumps with the WaveEngine. To do this, you would need the following:

  • 1 x HYDROS WaveEngine 0-10V Quad Cable
  • 4 x HYDROS WaveEngine 0-10V Tunze Adapter*

*You don't have to use four pumps. If you only had two pumps, you would only need 1 x Quad Cable and 2 x Tunze Adapters. We used four as our example since you can connect a maximum of four pumps with a Quad Cable.

The reason an additional adapter is needed to control Tunze pumps with a WaveEngine is because Tunze pump controllers have a 9-pin jack rather than the more common 3.5 mm stereo jack.

Combine your Tunze pumps with pumps from other brands using the HYDROS WaveEngine for a complete water circulation solution!

Ordering & pickup

Online checkout is for local pickup after your special order arrives. Contact High Tide Aquatics before ordering if you need shipping or delivery. Check the required controller, connection ports, power supply, and included components for your setup.

Manufacturer SKU: HDRS-WE-TNZPA

Call or text High Tide Aquatics: 239-244-6788.