HYDROS Triple Optical Level Sensor

$48.50

The HYDROS Triple Optical Water Level Sensor can be used for a variety of aquarium applications, such as sensing when your tank needs to be topped off or detecting when a dosing container needs a refill. It plugs into any Sense Port on a HYDROS device (like the Control XS, X2, X4, X10, etc.) and does not require any additional power source.

Available to special order — Ordered from our supplier; not stocked at our Palm Bay location. Contact us to confirm availability and fulfillment timing.

Product details & compatibility

3 Water Level Sensors for Added Redundancy

The HYDROS Triple Optical Water Level Sensor can be used for a variety of aquarium applications, such as sensing when your tank needs to be topped off or detecting when a dosing container needs a refill. It plugs into any Sense Port on a HYDROS device (like the Control XS, X2, X4, X10, etc.) and does not require any additional power source.

The HYDROS Water Level Sensor contains no moving parts that can fail. The optical eye is magnetically coupled with the magnet side measuring only ¼” thick. It can be mounted to most clear, tinted, or painted surfaces up to ½” thick. The sensor operates in the daytime or complete darkness so it’s safe for use hidden inside your aquarium stand or in the back chambers of an all-in-one aquarium. The sensors are easy to place, easy to move, and easy to clean.

3 Sensor Operation

When the water level in the sump or aquarium drops below the LOW LEVEL (3) on the sensor, it will fill the water till it reaches NORMAL LEVEL (2).

SAFETY LEVEL SENSOR (1) is a backup to shut down the feed pump in case of a malfunction; in this case, an alarm can be triggered.

Click Here for User Instructions

Compatibility 

Compatible with any HYDROS Controller with a green Sense port.

See all Your Dynamic Snippet will be displayed here... This message is displayed because you did not provide both a filter and a template to use.

Specifications & included equipment

HYDROS Triple Level Sensor Specs:

Dimensions

  • Sensor diameter: 0.75 in

  • Sensor thickness: 0.75 in

  • Magnet mount thickness: 0.25 in

Installation

  • Maximum mounting thickness: 0.5 in

  • Cord length: 75 in

  • Magnetic attachment

Compatibility

  • Suitable for freshwater and saltwater aquariums

Design & Protection

  • GX12 aviation-style connector maintains the Control’s IP65 rating (dust-tight and protected against water spray at any angle)

Ordering & pickup

Online checkout is for local pickup after your special order arrives. Contact High Tide Aquatics before ordering if you need shipping or delivery. Check the required controller, connection ports, power supply, and included components for your setup.

Manufacturer SKU: HDRS-LS3

Call or text High Tide Aquatics: 239-244-6788.

The HYDROS Triple Optical Water Level Sensor can be used for a variety of aquarium applications, such as sensing when your tank needs to be topped off or detecting when a dosing container needs a refill. It plugs into any Sense Port on a HYDROS device (like the Control XS, X2, X4, X10, etc.) and does not require any additional power source.

Available to special order — Ordered from our supplier; not stocked at our Palm Bay location. Contact us to confirm availability and fulfillment timing.

Product details & compatibility

3 Water Level Sensors for Added Redundancy

The HYDROS Triple Optical Water Level Sensor can be used for a variety of aquarium applications, such as sensing when your tank needs to be topped off or detecting when a dosing container needs a refill. It plugs into any Sense Port on a HYDROS device (like the Control XS, X2, X4, X10, etc.) and does not require any additional power source.

The HYDROS Water Level Sensor contains no moving parts that can fail. The optical eye is magnetically coupled with the magnet side measuring only ¼” thick. It can be mounted to most clear, tinted, or painted surfaces up to ½” thick. The sensor operates in the daytime or complete darkness so it’s safe for use hidden inside your aquarium stand or in the back chambers of an all-in-one aquarium. The sensors are easy to place, easy to move, and easy to clean.

3 Sensor Operation

When the water level in the sump or aquarium drops below the LOW LEVEL (3) on the sensor, it will fill the water till it reaches NORMAL LEVEL (2).

SAFETY LEVEL SENSOR (1) is a backup to shut down the feed pump in case of a malfunction; in this case, an alarm can be triggered.

Click Here for User Instructions

Compatibility 

Compatible with any HYDROS Controller with a green Sense port.

See all Your Dynamic Snippet will be displayed here... This message is displayed because you did not provide both a filter and a template to use.

Specifications & included equipment

HYDROS Triple Level Sensor Specs:

Dimensions

  • Sensor diameter: 0.75 in

  • Sensor thickness: 0.75 in

  • Magnet mount thickness: 0.25 in

Installation

  • Maximum mounting thickness: 0.5 in

  • Cord length: 75 in

  • Magnetic attachment

Compatibility

  • Suitable for freshwater and saltwater aquariums

Design & Protection

  • GX12 aviation-style connector maintains the Control’s IP65 rating (dust-tight and protected against water spray at any angle)

Ordering & pickup

Online checkout is for local pickup after your special order arrives. Contact High Tide Aquatics before ordering if you need shipping or delivery. Check the required controller, connection ports, power supply, and included components for your setup.

Manufacturer SKU: HDRS-LS3

Call or text High Tide Aquatics: 239-244-6788.