Image 1 of 2
Image 2 of 2
HYDROS Klir Filter Adapter Kit
The HYDROS Klir Filter Automation Control Adapter Kit (SKU: HDRS-KLIR-KIT) is an authentic smart-hardware integration bundle distributed by CoralVue to bring advanced multi-device automation to your aquarium's mechanical filtration circuit. Traditional drop-in fleece rollers rely on separate control boxes and localized sensors that act independently from your primary automation engine.
Available to special order — Ordered from our supplier; not stocked at our Palm Bay location. Contact us to confirm availability and fulfillment timing.
Product details & compatibility
HYDROS Klir Filter Automation Control Adapter Kit (SKU: HDRS-KLIR-KIT)
The HYDROS Klir Filter Automation Control Adapter Kit (SKU: HDRS-KLIR-KIT) is an authentic smart-hardware integration bundle distributed by CoralVue to bring advanced multi-device automation to your aquarium's mechanical filtration circuit. Traditional drop-in fleece rollers rely on separate control boxes and localized sensors that act independently from your primary automation engine. This disconnected setup can lead to common issues, such as the roller unspooling an entire roll of clean fleece when the return pump turns off and the sump fills with water. By switching your hardware over to the HYDROS ecosystem, you move your roller logic into an interactive environment where it communicates continuously with your entire filtration array.
This complete hardware package contains a HYDROS Klir Drive Port Adapter Cable paired with a specialized HYDROS Water Level Sensor. The system operates by converting an unused 12V DC Drive Port on your controller into a smart power source for the roller motor. The software configuration features a dedicated, pre-built "Klir" device family profile within the native HYDROS app. As detritus coats the 50-micron fleece and forces the mechanical chamber water line to rise, the HYDROS sensor monitors the level and tells the engine to pulse power to the motor line. This setup delivers crisp advancing cycles, monitors real-time current draw to watch for motor jams, and sends immediate status updates directly to your smartphone if your fleece is exhausted.
Key Features
Halts Wasted Fleece Roll Runaways: Allows you to configure a smart dependency rule inside the app that locks out the roller motor whenever your return pump is off or in "Feed Mode."
Advanced Current Draw Diagnostics: Monitors the active electrical profile across the drive port circuit, alerting you if a twisted roll causes power draw to spike outside normal limits.
Cleans Up Sump Cabinets: Removes redundant low-voltage wall transformers from your power strips, streamlining your wiring layout.
(Note: This accessory kit includes (1) Klir Drive Port Adapter Cable and (1) HYDROS Water Level Sensor. Complete Klir Di-4/Di-7 fleece roller assemblies, Command Bus extension cables, Device terminators, and Control Engines are sold under separate product categories).
Specifications & included equipment
What’s Included:
(1) HYDROS Klir Drive Port Adapter Cable (SKU: HDRS-CBC-KLR)
(1) HYDROS Water Level Sensor with Mounting Bracket
Technical Specs:
Official Manufacturing Title: HYDROS Klir Adapter Kit
SKU / Factory Part Identifier: HDRS-KLIR-KIT
Electrical Interface Class: 12V DC Low-Voltage Drive Port Loop Integration
Command Connection Format: Direct Smart-Sensed Device Tracking Array via HYDROS App
System Component Profile: Molded Strain-Relief Over-Bonds with Heavy Gauge Wire Jacketing
Chassis Platform Compatibility: Form-Fitted strictly for Klir Di-4 and Klir Di-7 Fleece Filters linked to HYDROS Control Units (Control X4, Control 4, WaveEngine, etc.)
Official Manufacturer Warranty Support: 6-Month Limited Factory Defect Coverage managed via CoralVue
Compatibility
Requires a HYDROS Control with:
1 available Drive Port
1 available Sense Port
Suitable for freshwater and saltwater aquarium systems
Ordering & pickup
Online checkout is for local pickup after your special order arrives. Contact High Tide Aquatics before ordering if you need shipping or delivery. Check the required controller, connection ports, power supply, and included components for your setup.
Manufacturer SKU: HDRS-KLR-KT
The HYDROS Klir Filter Automation Control Adapter Kit (SKU: HDRS-KLIR-KIT) is an authentic smart-hardware integration bundle distributed by CoralVue to bring advanced multi-device automation to your aquarium's mechanical filtration circuit. Traditional drop-in fleece rollers rely on separate control boxes and localized sensors that act independently from your primary automation engine.
Available to special order — Ordered from our supplier; not stocked at our Palm Bay location. Contact us to confirm availability and fulfillment timing.
Product details & compatibility
HYDROS Klir Filter Automation Control Adapter Kit (SKU: HDRS-KLIR-KIT)
The HYDROS Klir Filter Automation Control Adapter Kit (SKU: HDRS-KLIR-KIT) is an authentic smart-hardware integration bundle distributed by CoralVue to bring advanced multi-device automation to your aquarium's mechanical filtration circuit. Traditional drop-in fleece rollers rely on separate control boxes and localized sensors that act independently from your primary automation engine. This disconnected setup can lead to common issues, such as the roller unspooling an entire roll of clean fleece when the return pump turns off and the sump fills with water. By switching your hardware over to the HYDROS ecosystem, you move your roller logic into an interactive environment where it communicates continuously with your entire filtration array.
This complete hardware package contains a HYDROS Klir Drive Port Adapter Cable paired with a specialized HYDROS Water Level Sensor. The system operates by converting an unused 12V DC Drive Port on your controller into a smart power source for the roller motor. The software configuration features a dedicated, pre-built "Klir" device family profile within the native HYDROS app. As detritus coats the 50-micron fleece and forces the mechanical chamber water line to rise, the HYDROS sensor monitors the level and tells the engine to pulse power to the motor line. This setup delivers crisp advancing cycles, monitors real-time current draw to watch for motor jams, and sends immediate status updates directly to your smartphone if your fleece is exhausted.
Key Features
Halts Wasted Fleece Roll Runaways: Allows you to configure a smart dependency rule inside the app that locks out the roller motor whenever your return pump is off or in "Feed Mode."
Advanced Current Draw Diagnostics: Monitors the active electrical profile across the drive port circuit, alerting you if a twisted roll causes power draw to spike outside normal limits.
Cleans Up Sump Cabinets: Removes redundant low-voltage wall transformers from your power strips, streamlining your wiring layout.
(Note: This accessory kit includes (1) Klir Drive Port Adapter Cable and (1) HYDROS Water Level Sensor. Complete Klir Di-4/Di-7 fleece roller assemblies, Command Bus extension cables, Device terminators, and Control Engines are sold under separate product categories).
Specifications & included equipment
What’s Included:
(1) HYDROS Klir Drive Port Adapter Cable (SKU: HDRS-CBC-KLR)
(1) HYDROS Water Level Sensor with Mounting Bracket
Technical Specs:
Official Manufacturing Title: HYDROS Klir Adapter Kit
SKU / Factory Part Identifier: HDRS-KLIR-KIT
Electrical Interface Class: 12V DC Low-Voltage Drive Port Loop Integration
Command Connection Format: Direct Smart-Sensed Device Tracking Array via HYDROS App
System Component Profile: Molded Strain-Relief Over-Bonds with Heavy Gauge Wire Jacketing
Chassis Platform Compatibility: Form-Fitted strictly for Klir Di-4 and Klir Di-7 Fleece Filters linked to HYDROS Control Units (Control X4, Control 4, WaveEngine, etc.)
Official Manufacturer Warranty Support: 6-Month Limited Factory Defect Coverage managed via CoralVue
Compatibility
Requires a HYDROS Control with:
1 available Drive Port
1 available Sense Port
Suitable for freshwater and saltwater aquarium systems
Ordering & pickup
Online checkout is for local pickup after your special order arrives. Contact High Tide Aquatics before ordering if you need shipping or delivery. Check the required controller, connection ports, power supply, and included components for your setup.
Manufacturer SKU: HDRS-KLR-KT