HYDROS Klir Drive Port Adapter Cable

$17.31

The HYDROS Klir Drive Port Adapter Cable (SKU: HDRS-CBC-KLR) is an authentic structural OEM wiring component distributed by CoralVue to bring advanced multi-device automation to your aquarium's mechanical filtration circuit. Traditional drop-in fleece rollers rely on separate control boxes and localized sensors that act independently from your primary automation engine.

Available to special order — Ordered from our supplier; not stocked at our Palm Bay location. Contact us to confirm availability and fulfillment timing.

Product details & compatibility

HYDROS Klir Drive Port Adapter Cable (SKU: HDRS-CBC-KLR)

The HYDROS Klir Drive Port Adapter Cable (SKU: HDRS-CBC-KLR) is an authentic structural OEM wiring component distributed by CoralVue to bring advanced multi-device automation to your aquarium's mechanical filtration circuit. Traditional drop-in fleece rollers rely on separate control boxes and localized sensors that act independently from your primary automation engine. This disconnected setup can lead to common issues, such as the roller unspooling an entire roll of clean fleece when the return pump turns off and the sump fills with water. By switching your hardware over to the HYDROS ecosystem, you move your roller logic into an interactive environment where it communicates continuously with your entire filtration array.

This heavy-duty cable features a customized layout: a standard low-voltage barrel connector at one end to mate with the internal Klir motor, and a threaded 2-pin female aircraft-style connector at the other to plug directly into your smart engine. By routing power through an open HYDROS Drive Port, the app’s central processing core can monitor the active electrical circuit, track power consumption spikes to watch for mechanical roll jams, and send immediate status updates to your mobile device the moment your fleece is exhausted.

Key Features

  • Eliminates Tangled Sump Cables: Draws operational wattage directly through the primary command bus line, clearing out clutter and freeing up standard wall sockets.

  • Enables Interactive Security Logic: Moves motor operation under your central control network, letting you program rules that pause the fleece loop during feed modes or return pump shutoffs.

  • Tool-Free Modular Disconnect Action: Threaded safety collar rings lock tight by hand, maintaining an IP65-rated splash-proof connection inside damp cabinets.

  • (Note: This retail SKU contains (1) standalone HDRS-CBC-KLR Drive Port Adapter Cable. To complete the system configuration, a standalone HYDROS Water Level Sensor, Command Bus extension lines, and a control engine like the Control X4 or WaveEngine are sold under separate product categories).

Specifications & included equipment

What’s Included:

  • (1) HYDROS Klir Drive Port Adapter Cable

Technical Specs:

  • Official Manufacturing Title: HYDROS Klir Drive Port Cable

  • SKU / Factory Part Identifier: HDRS-CBC-KLR

  • Electrical Interface Class: 12V DC Low-Voltage Drive Port Loop Integration

  • Input Interface Profile: 2-Pin Threaded Female Aircraft Safety Connector

  • Output Interface Profile: Female Low-Voltage Barrel Power Plug

  • Chassis Platform Compatibility: Form-Fitted for Klir Di-4 and Klir Di-7 Fleece Filters linked to HYDROS Control Units (Control X4, Control 4, WaveEngine, Control X2, etc.)

Ordering & pickup

Online checkout is for local pickup after your special order arrives. Contact High Tide Aquatics before ordering if you need shipping or delivery. Check the required controller, connection ports, power supply, and included components for your setup.

Manufacturer SKU: HDRS-CBC-KLR

Call or text High Tide Aquatics: 239-244-6788.

The HYDROS Klir Drive Port Adapter Cable (SKU: HDRS-CBC-KLR) is an authentic structural OEM wiring component distributed by CoralVue to bring advanced multi-device automation to your aquarium's mechanical filtration circuit. Traditional drop-in fleece rollers rely on separate control boxes and localized sensors that act independently from your primary automation engine.

Available to special order — Ordered from our supplier; not stocked at our Palm Bay location. Contact us to confirm availability and fulfillment timing.

Product details & compatibility

HYDROS Klir Drive Port Adapter Cable (SKU: HDRS-CBC-KLR)

The HYDROS Klir Drive Port Adapter Cable (SKU: HDRS-CBC-KLR) is an authentic structural OEM wiring component distributed by CoralVue to bring advanced multi-device automation to your aquarium's mechanical filtration circuit. Traditional drop-in fleece rollers rely on separate control boxes and localized sensors that act independently from your primary automation engine. This disconnected setup can lead to common issues, such as the roller unspooling an entire roll of clean fleece when the return pump turns off and the sump fills with water. By switching your hardware over to the HYDROS ecosystem, you move your roller logic into an interactive environment where it communicates continuously with your entire filtration array.

This heavy-duty cable features a customized layout: a standard low-voltage barrel connector at one end to mate with the internal Klir motor, and a threaded 2-pin female aircraft-style connector at the other to plug directly into your smart engine. By routing power through an open HYDROS Drive Port, the app’s central processing core can monitor the active electrical circuit, track power consumption spikes to watch for mechanical roll jams, and send immediate status updates to your mobile device the moment your fleece is exhausted.

Key Features

  • Eliminates Tangled Sump Cables: Draws operational wattage directly through the primary command bus line, clearing out clutter and freeing up standard wall sockets.

  • Enables Interactive Security Logic: Moves motor operation under your central control network, letting you program rules that pause the fleece loop during feed modes or return pump shutoffs.

  • Tool-Free Modular Disconnect Action: Threaded safety collar rings lock tight by hand, maintaining an IP65-rated splash-proof connection inside damp cabinets.

  • (Note: This retail SKU contains (1) standalone HDRS-CBC-KLR Drive Port Adapter Cable. To complete the system configuration, a standalone HYDROS Water Level Sensor, Command Bus extension lines, and a control engine like the Control X4 or WaveEngine are sold under separate product categories).

Specifications & included equipment

What’s Included:

  • (1) HYDROS Klir Drive Port Adapter Cable

Technical Specs:

  • Official Manufacturing Title: HYDROS Klir Drive Port Cable

  • SKU / Factory Part Identifier: HDRS-CBC-KLR

  • Electrical Interface Class: 12V DC Low-Voltage Drive Port Loop Integration

  • Input Interface Profile: 2-Pin Threaded Female Aircraft Safety Connector

  • Output Interface Profile: Female Low-Voltage Barrel Power Plug

  • Chassis Platform Compatibility: Form-Fitted for Klir Di-4 and Klir Di-7 Fleece Filters linked to HYDROS Control Units (Control X4, Control 4, WaveEngine, Control X2, etc.)

Ordering & pickup

Online checkout is for local pickup after your special order arrives. Contact High Tide Aquatics before ordering if you need shipping or delivery. Check the required controller, connection ports, power supply, and included components for your setup.

Manufacturer SKU: HDRS-CBC-KLR

Call or text High Tide Aquatics: 239-244-6788.