Image 1 of 6
Image 2 of 6
Image 3 of 6
Image 4 of 6
Image 5 of 6
Image 6 of 6
HYDROS DC Micro Pump
With a HYDROS DC Micro Pump and a HYDROS Optical Water Level Sensor (or Float Sensor), you can use a HYDROS Control as an auto top-off (ATO) system. Just plug the pump into a Drive Port and the water level sensor into a HYDROS Control and adjust your settings in the HYDROS app.
Available to special order — Ordered from our supplier; not stocked at our Palm Bay location. Contact us to confirm availability and fulfillment timing.
Product details & compatibility
HYDROS DC Micro Pump
With a HYDROS DC Micro Pump and a HYDROS Optical Water Level Sensor (or Float Sensor), you can use a HYDROS Control as an auto top-off (ATO) system. Just plug the pump into a Drive Port and the water level sensor into a HYDROS Control and adjust your settings in the HYDROS app. In addition, you can add additional HYDROS optical water level and/or mechanical float sensors to your ATO configuration for redundancy and set high/low points.
The HYDROS DC Micro Pump is powerful despite its small size. The pump measures 1.6” L x 1.062” W x 1.45” H. The pump has a maximum head pressure of 8’. The flow rate of the pump is 74 gallons per hour. This 12V brushless pump draws a maximum of 4.5W and has an average life expectancy of 30,000 hours (over three years). When connected to a Drive Port on a HYDROS Control and the controller will supply power to the pump, so no additional cords or power bricks are required for operation. Using a HYDROS aquarium controller for your auto top-off system is a reliable solution and helps clear wire clutter in and around your aquarium.
Specifications & included equipment
HYDROS DC Micro Pump Specs:
Size: 1.6” L x 1.062” W x 1.45” H
Max Head: 8’
Power: 4.5W @ DC12V
Style: DC Brushless
Life: 30,000 hours (3+ years)
- Tubing Size: 8.5mm OD, 6.5mm ID
The HYDROS DC Micro Pump uses a GX12 aviation-style connector, so HYDROS Controls maintain their IP65 rating (dust-tight and protected from water spray at any angle).
Powered and controlled by plugging into a Drive Port on the HYDROS Control X2 or Control X4. No other power cord is required.
It is manufactured by AutoAqua, an official HYDROS Technology Partner.
The HYDROS DC Micro Pump is an official HYDROS Accessory manufactured by AutoAqua in Taiwan. Creators of the Smart ATO Micro, AutoAqua is one of the most well-known and trusted makers of ATO systems in the aquarium hobby today. CoralVue has thoroughly tested the DC Micro Pump to ensure seamless compatibility with the HYDROS platform. The product development team at CoralVue engineered the pump, so it connects with a Drive Port on the controller using an aviation-style plug for safer operation. No additional power source is needed to run the pump.
Ordering & pickup
Online checkout is for local pickup after your special order arrives. Contact High Tide Aquatics before ordering if you need shipping or delivery. Check the required controller, connection ports, power supply, and included components for your setup.
Manufacturer SKU: HDRS-DP-200H
With a HYDROS DC Micro Pump and a HYDROS Optical Water Level Sensor (or Float Sensor), you can use a HYDROS Control as an auto top-off (ATO) system. Just plug the pump into a Drive Port and the water level sensor into a HYDROS Control and adjust your settings in the HYDROS app.
Available to special order — Ordered from our supplier; not stocked at our Palm Bay location. Contact us to confirm availability and fulfillment timing.
Product details & compatibility
HYDROS DC Micro Pump
With a HYDROS DC Micro Pump and a HYDROS Optical Water Level Sensor (or Float Sensor), you can use a HYDROS Control as an auto top-off (ATO) system. Just plug the pump into a Drive Port and the water level sensor into a HYDROS Control and adjust your settings in the HYDROS app. In addition, you can add additional HYDROS optical water level and/or mechanical float sensors to your ATO configuration for redundancy and set high/low points.
The HYDROS DC Micro Pump is powerful despite its small size. The pump measures 1.6” L x 1.062” W x 1.45” H. The pump has a maximum head pressure of 8’. The flow rate of the pump is 74 gallons per hour. This 12V brushless pump draws a maximum of 4.5W and has an average life expectancy of 30,000 hours (over three years). When connected to a Drive Port on a HYDROS Control and the controller will supply power to the pump, so no additional cords or power bricks are required for operation. Using a HYDROS aquarium controller for your auto top-off system is a reliable solution and helps clear wire clutter in and around your aquarium.
Specifications & included equipment
HYDROS DC Micro Pump Specs:
Size: 1.6” L x 1.062” W x 1.45” H
Max Head: 8’
Power: 4.5W @ DC12V
Style: DC Brushless
Life: 30,000 hours (3+ years)
- Tubing Size: 8.5mm OD, 6.5mm ID
The HYDROS DC Micro Pump uses a GX12 aviation-style connector, so HYDROS Controls maintain their IP65 rating (dust-tight and protected from water spray at any angle).
Powered and controlled by plugging into a Drive Port on the HYDROS Control X2 or Control X4. No other power cord is required.
It is manufactured by AutoAqua, an official HYDROS Technology Partner.
The HYDROS DC Micro Pump is an official HYDROS Accessory manufactured by AutoAqua in Taiwan. Creators of the Smart ATO Micro, AutoAqua is one of the most well-known and trusted makers of ATO systems in the aquarium hobby today. CoralVue has thoroughly tested the DC Micro Pump to ensure seamless compatibility with the HYDROS platform. The product development team at CoralVue engineered the pump, so it connects with a Drive Port on the controller using an aviation-style plug for safer operation. No additional power source is needed to run the pump.
Ordering & pickup
Online checkout is for local pickup after your special order arrives. Contact High Tide Aquatics before ordering if you need shipping or delivery. Check the required controller, connection ports, power supply, and included components for your setup.
Manufacturer SKU: HDRS-DP-200H