Image 1 of 2
Image 2 of 2
HYDROS 100' Command Bus Cable (Data ONLY)
The HYDROS 100 ft Data-Only Command Bus Cable connects HYDROS devices so they can communicate as part of a Collective. This cable is for data communication only. It does not send power from one HYDROS device to another.
Available to special order — Ordered from our supplier; not stocked at our Palm Bay location. Contact us to confirm availability and fulfillment timing.
Product details & compatibility
Data-Only Command Bus Cable for HYDROS Collective Systems
The HYDROS 100 ft Data-Only Command Bus Cable connects HYDROS devices so they can communicate as part of a Collective. This cable is for data communication only. It does not send power from one HYDROS device to another.
Use this cable when a HYDROS system needs a long Command Bus run, but each controller or device will have its own power source. That makes it useful for larger equipment rooms, remote sumps, fish rooms, or controller boards mounted far apart.
Key Features
• 5-pin HYDROS Command Bus cable for device communication.
• Data-only design allows communication without passing power between units.
• 100 ft length supports long runs between separated HYDROS devices.
• Helps connect HYDROS devices into a shared Collective.
• Useful when each connected controller has its own local power supply.
• Helps keep communication and power distribution separate in larger HYDROS layouts.
• Compatible with HYDROS devices that use Command Bus ports.
• Supported by CoralVue and HYDROS 6-month limited warranty.
Ideal For
• HYDROS Collectives with controllers installed far apart from each other.
• Aquarium systems with remote sumps, fish rooms, or separate equipment areas.
• Builds where each HYDROS device has local power and only data needs to travel through the cable.
Pro Tips
• Use the right cable type. DATA ONLY cables do not pass power. Use this cable only when each connected HYDROS device has its own power source.
• Plan power before routing the cable. A long data-only run still needs powered HYDROS devices at each end. Confirm power supplies before final mounting.
• Terminate the Command Bus correctly. HYDROS Command Bus systems use terminators at the ends of the bus. Add terminators where the layout requires them.
• Label both ends of the run. A 100 ft cable may pass through walls, stands, or equipment rooms. Labeling both ends makes future service easier.
• Keep the cable path serviceable. Avoid pinching, tight bends, or routes that cannot be reached later. Leave enough slack to remove a controller if needed.
Specifications & included equipment
Product Specifications
Cable length: 100ft
Cable type: Data-only Command Bus cable
Ordering & pickup
Online checkout is for local pickup after your special order arrives. Contact High Tide Aquatics before ordering if you need shipping or delivery. Check the required controller, connection ports, power supply, and included components for your setup.
Manufacturer SKU: HDRS-CBC-D100
The HYDROS 100 ft Data-Only Command Bus Cable connects HYDROS devices so they can communicate as part of a Collective. This cable is for data communication only. It does not send power from one HYDROS device to another.
Available to special order — Ordered from our supplier; not stocked at our Palm Bay location. Contact us to confirm availability and fulfillment timing.
Product details & compatibility
Data-Only Command Bus Cable for HYDROS Collective Systems
The HYDROS 100 ft Data-Only Command Bus Cable connects HYDROS devices so they can communicate as part of a Collective. This cable is for data communication only. It does not send power from one HYDROS device to another.
Use this cable when a HYDROS system needs a long Command Bus run, but each controller or device will have its own power source. That makes it useful for larger equipment rooms, remote sumps, fish rooms, or controller boards mounted far apart.
Key Features
• 5-pin HYDROS Command Bus cable for device communication.
• Data-only design allows communication without passing power between units.
• 100 ft length supports long runs between separated HYDROS devices.
• Helps connect HYDROS devices into a shared Collective.
• Useful when each connected controller has its own local power supply.
• Helps keep communication and power distribution separate in larger HYDROS layouts.
• Compatible with HYDROS devices that use Command Bus ports.
• Supported by CoralVue and HYDROS 6-month limited warranty.
Ideal For
• HYDROS Collectives with controllers installed far apart from each other.
• Aquarium systems with remote sumps, fish rooms, or separate equipment areas.
• Builds where each HYDROS device has local power and only data needs to travel through the cable.
Pro Tips
• Use the right cable type. DATA ONLY cables do not pass power. Use this cable only when each connected HYDROS device has its own power source.
• Plan power before routing the cable. A long data-only run still needs powered HYDROS devices at each end. Confirm power supplies before final mounting.
• Terminate the Command Bus correctly. HYDROS Command Bus systems use terminators at the ends of the bus. Add terminators where the layout requires them.
• Label both ends of the run. A 100 ft cable may pass through walls, stands, or equipment rooms. Labeling both ends makes future service easier.
• Keep the cable path serviceable. Avoid pinching, tight bends, or routes that cannot be reached later. Leave enough slack to remove a controller if needed.
Specifications & included equipment
Product Specifications
Cable length: 100ft
Cable type: Data-only Command Bus cable
Ordering & pickup
Online checkout is for local pickup after your special order arrives. Contact High Tide Aquatics before ordering if you need shipping or delivery. Check the required controller, connection ports, power supply, and included components for your setup.
Manufacturer SKU: HDRS-CBC-D100